new libedit works fine on linux, solaris and macosx so lets use it :)

git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@7503 d0543943-73ff-0310-b7d9-9358b9ac24b2

libs/libedit.old/COPYING

-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
-   notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-3. Neither the name of the University nor the names of its contributors
-   may be used to endorse or promote products derived from this software
-   without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.

libs/libedit.old/ChangeLog

-2007-03-02  Jess Thrysoee
-
-   * version-info: 0:24:0
-
-   * all: sync with upstream source.
-
-2006-10-22  Jess Thrysoee
-
-   * version-info: 0:23:0
-
-   * src/shlib_version: Upstream bumped minor version from 9 to 10.
-
-   * all: sync with upstream source. More readline functions.
-
-2006-10-22  Jess Thrysoee
-
-   * version-info: 0:22:0
-
-   * all: sync with upstream source.
-
-2006-08-29  Jess Thrysoee
-
-   * version-info: 0:21:0
-
-   * all: License cleanup. All 4-clause advertising BSD licenses has been
-	changed to the 3-clause version by upstream.
-
-   * src/fgetln.c: use src/tools/compat/fgetln.c instead of
-	othersrc/libexec/tnftpd/libnetbsd/fgetln.c
-
-2006-08-16  Jess Thrysoee
-
-   * version-info: 0:20:0
-
-   * all: sync with upstream source.
-
-2006-06-03  Jess Thrysoee
-
-   * version-info: 0:19:0
-
-   * COPYING: added global license file
-
-   * all: sync with upstream source.
-
-2006-02-13  Jess Thrysoee
-
-   * version-info: 0:18:0
-
-   * src/readline.c: Partial rl_getc_function support, patch by Kjeld Borch
-	Egevang.
-
-   * src/readline.c: Make write_history and read_history returncode readline
-	compatible. Upstream patch.
-
-2006-01-03  Jess Thrysoee
-
-   * version-info: 0:17:0
-
-   * patches/cvs_export.sh: strlcat.c and strlcpy.c was moved to
-	src/common/lib/libc/string in the upstream cvs repository.
-
-   * all: sync with upstream source. 
-
-2005-10-22  Jess Thrysoee
-
-   * version-info: 0:16:0
-
-   * patches/*.patch, configure.ac: define SCCSID, undef LIBC_SCCS. Remove
-	fourteen cosmetic patches.
-
-   * all: sync with upstream source. 
-
-2005-09-11  Jess Thrysoee
-
-   * version-info: 0:15:0
-
-   * src/Makefile.am: fix typo that meant generated files were distributes,
-	and make generated file targets dependent on the the 'makelist' input
-	files.
-
-   * all: sync with upstream source. This is just a manpage update
-
-2005-08-28  Jess Thrysoee
-
-   * version-info: 0:14:0
-
-   * src/sys.h: include config.h to avoid "redefinition of
-	`u_int32_t'". Patch by Norihiko Murase.
-
-   * src/search.c: explicitly include sys/types.h, because regex.h on
-	FreeBSD needs it and does not include it itself. Patch by Norihiko Murase.
-
-   * acinclude.m4: added EL_GETPW_R_DRAFT test and use AC_TRY_LINK instead
-	of AC_TRY_COMPILE. Suggested by Norihiko Murase.
-
-   * all: sync with upstream source. 
-
-2005-08-16  Jess Thrysoee
-
-   * version-info: 0:13:0
-
-   * all: sync with upstream source. 
-
-2005-08-05  Jess Thrysoee
-
-   * version-info: 0:12:0
-
-   * all: sync with upstream source. 
-
-2005-07-24  Jess Thrysoee
-
-   * version-info: 0:11:0
-
-   * histedit.h, histedit.c, readline.c, editline/readline.h: From
-	upstream; added remove_history().
-
-2005-07-07  Jess Thrysoee
-
-   * version-info: 0:10:0
-
-   * history.c, key.c: From upstream source; Fix memory leaks found by
-	valgrind.
-
-2005-06-28  Jess Thrysoee
-
-   * version-info: 0:9:0
-
-   * src/readline.c: getpwent_r is not POSIX, always use getpwent.
-	Reported by Gerrit P. Haase.
-
-   * src/Makefile.am: Added libtool -no-undefined. This is needed on Cygwin
-	to get a shared editline library. Should not affect other platforms.
-	Suggested by Gerrit P. Haase.
-
-2005-06-15  Jess Thrysoee
-
-   * version-info: 0:8:0
-
-   * all: sync with upstream source. 
-
-2005-06-01  Jess Thrysoee
-
-   * version-info: 0:7:0
-
-   * all: sync with upstream source.
-
-   * src/readline.c, src/filecomplete.c: Solaris use POSIX draft versions
-	of getpwent_r, getpwnam_r and getpwuid_r which return 'struct passwd *'.
-	Define HAVE_GETPW_R_POSIX if these functions are (non draft) POSIX
-	compatible. Patch by Julien Torrs.
-
-2005-05-28  Jess Thrysoee
-
-   * version-info: 0:6:0
-
-   * all: sync with upstream source.
-
-2005-03-11  Jess Thrysoee
-
-   * version-info: 0:5:0
-
-   * all: sync with upstream source.
-
-2004-12-07  Jess Thrysoee
-
-   * version-info: 0:4:0
-
-   * src/readline.c: d_namlen (in struct dirent) is not portable, always
-	use strlen. Patch by Scott Rankin.
-
-2004-11-27  Jess Thrysoee
-
-   * version-info: 0:3:0
-
-   * src/history.c: bug #26785 fixed upstream, removed local patch.
-
-2004-11-06  Jess Thrysoee
-
-   * version-info: 0:2:0
-
-   * all: sync with upstream source.
-
-   * doc/Makefile.am: If mdoc2man fails, remove empty file. Patch by 
-	Darren Tucker.
-
-2004-10-14  Jess Thrysoee
-
-   * version-info: 0:1:0
-
-   * doc/Makefile.am: 'make install' twice fails. Remove old links before
-	trying to link the man pages. Patch by Rick Richardson.
-
-2004-09-28  Jess Thrysoee
-
-   * version-info: 0:0:0
-
-   * acinclude.m4 configure.ac src/Makefile.am: Adhere to
-	LibTools library interface versions recommendation.
-	http://www.gnu.org/software/libtool/manual.html#SEC32
-
-   * doc/Makefile.am: name all manpage links as el_* (e.g. el_history.3)
-	to avoid conflicts.
-
-2004-09-08  Jess Thrysoee
-
-   * all: Initial package.

libs/libedit.old/INSTALL

-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
-
-   This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
-   These are generic installation instructions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
-for details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-   Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-will cause the specified gcc to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-`configure' Invocation
-======================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
-     Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
-

libs/libedit.old/Makefile.am

-
-AUTOMAKE_OPTIONS = foreign
-
-SUBDIRS = src
-
-## GENERATED BY SCRIPT - DO NOT EDIT BELOW
-
-EXTRA_DIST = patches/README \
-             patches/00-readline.h.patch \
-             patches/01-strlcat.c.patch \
-             patches/02-strlcpy.c.patch \
-             patches/03-vis.c.patch \
-             patches/04-unvis.c.patch \
-             patches/05-vis.h.patch \
-             patches/06-fgetln.c.patch \
-             patches/07-el_term.h.patch \
-             patches/08-el.c.patch \
-             patches/09-el.h.patch \
-             patches/10-filecomplete.c.patch \
-             patches/11-history.c.patch \
-             patches/12-readline.c.patch \
-             patches/13-search.c.patch \
-             patches/14-sys.h.patch \
-             patches/15-term.c.patch \
-             patches/16-tc1.c.patch \
-             patches/17-editline.3.roff.patch \
-             patches/18-editrc.5.roff.patch \
-             patches/cvs_export.sh \
-             patches/patches_make.sh \
-             patches/patches_apply.sh \
-             patches/patches_check.sh \
-             patches/extra_dist_list.sh \
-             patches/update_version.sh \
-             patches/update_dist.sh \
-             patches/timestamp.cvsexport
-

libs/libedit.old/THANKS

-Thanks to the NetBSD Project maintainers of libedit!

libs/libedit.old/acinclude.m4

-
-dnl
-dnl read lib version from file (and trim trailing newline)
-dnl
-define([EL_RELEASE], [patsubst(esyscmd([. src/shlib_version; echo $major.$minor]), [
-])])
-
-dnl
-dnl read cvsexport timestamp from file (and trim trailing newline)
-dnl
-dnl define([EL_TIMESTAMP_CVSEXPORT], [patsubst(esyscmd([cat patches/timestamp.cvsexport]), [
-define([EL_TIMESTAMP_CVSEXPORT], [patsubst(esyscmd([date +"%Y%m%d"]), [
-])])
-
-
-dnl
-dnl NetBSD use the -mdoc macro package for manpages, but e.g.
-dnl AIX and Solaris only support the -man package. 
-dnl
-AC_DEFUN([EL_MANTYPE],
-[
-   MANTYPE=
-   TestPath="/usr/bin${PATH_SEPARATOR}/usr/ucb"
-   AC_PATH_PROGS(NROFF, nroff awf, /bin/false, $TestPath)
-   if ${NROFF} -mdoc ${srcdir}/doc/editrc.5.roff >/dev/null 2>&1; then
-      MANTYPE=mdoc
-   fi
-   AC_SUBST(MANTYPE)
-])
-
-
-dnl
-dnl Check if getpwnam_r and getpwuid_r are POSIX.1 compatible
-dnl POSIX draft version returns 'struct passwd *' (used on Solaris)
-dnl NOTE: getpwent_r is not POSIX so we always use getpwent
-dnl
-AC_DEFUN([EL_GETPW_R_POSIX],
-[
-   AC_MSG_CHECKING([whether getpwnam_r and getpwuid_r are posix like])
-      # The prototype for the POSIX version is:
-      # int getpwnam_r(char *, struct passwd *, char *, size_t, struct passwd **)
-      # int getpwuid_r(uid_t, struct passwd *, char *, size_t, struct passwd **);
-   AC_TRY_LINK([#include <stdlib.h>
-                #include <sys/types.h>
-                #include <pwd.h>],
-               [getpwnam_r(NULL, NULL, NULL, (size_t)0, NULL);
-                getpwuid_r((uid_t)0, NULL, NULL, (size_t)0, NULL);],
-      [AC_DEFINE([HAVE_GETPW_R_POSIX], 1, [Define to 1 if you have getpwnam_r and getpwuid_r that are POSIX.1 compatible.]) 
-       AC_MSG_RESULT(yes)],
-      [AC_MSG_RESULT(no)])
-])
-
-AC_DEFUN([EL_GETPW_R_DRAFT],
-[
-   AC_MSG_CHECKING([whether getpwnam_r and getpwuid_r are posix _draft_ like])
-      # The prototype for the POSIX draft version is:
-      # struct passwd *getpwuid_r(uid_t, struct passwd *, char *, int);
-      # struct passwd *getpwnam_r(char *, struct passwd *,  char *, int);
-   AC_TRY_LINK([#include <stdlib.h>
-                #include <sys/types.h>
-                #include <pwd.h>],
-               [getpwnam_r(NULL, NULL, NULL, (size_t)0);
-                getpwuid_r((uid_t)0, NULL, NULL, (size_t)0);],
-      [AC_DEFINE([HAVE_GETPW_R_DRAFT], 1, [Define to 1 if you have getpwnam_r and getpwuid_r that are draft POSIX.1 versions.]) 
-       AC_MSG_RESULT(yes)],
-      [AC_MSG_RESULT(no)])
-])

libs/libedit.old/configure.ac

-#                                               -*- Autoconf -*-
-# Process this file with autoconf to produce a configure script.
-
-AC_INIT(libedit, [EL_RELEASE],, libedit-[EL_TIMESTAMP_CVSEXPORT])
-AC_CONFIG_SRCDIR([src/strlcat.c])
-AC_CONFIG_HEADERS([config.h])
-
-AM_INIT_AUTOMAKE
-AC_PROG_LIBTOOL
-
-# libtool -version-info
-AC_SUBST(LT_VERSION, [0:24:0])
-
-# AC_PROG_LIBTOOL runs AC_CANONICAL_HOST
-case $host in 
-   *-sun-*) AC_DEFINE([_SUNOS], [], [Solaris's term.h does horrid things.]);;
-esac
-
-CFLAGS="$CFLAGS -D_XOPEN_SOURCE=600 -D_BSD_SOURCE=1"
-
-# Checks for programs.
-AC_PROG_CXX
-AC_PROG_CC
-AC_PROG_LN_S
-AC_PROG_AWK
-EL_MANTYPE
-
-AC_CHECK_LIB(curses, tgetent,,
-   [AC_CHECK_LIB(ncurses, tgetent,,
-      [AC_MSG_ERROR([libtermcap and libcurses or libncurses are required!])] )] )
-
-# Checks for header files.
-AC_FUNC_ALLOCA
-AC_HEADER_DIRENT
-AC_HEADER_STDC
-AC_HEADER_SYS_WAIT
-AC_CHECK_HEADERS([fcntl.h limits.h malloc.h stdlib.h string.h sys/ioctl.h sys/param.h unistd.h curses.h ncurses.h sys/cdefs.h])
-
-AC_CHECK_HEADER([termios.h], [], [AC_MSG_ERROR([termios.h is required!])],[])
-
-## include curses.h to prevent "Present But Cannot Be Compiled"
-AC_CHECK_HEADERS([term.h],,,
-[[#if HAVE_CURSES_H
-# include <curses.h>
-#elif HAVE_NCURSES_H
-# include <ncurses.h>
-#endif
-]])
-
-# Checks for typedefs, structures, and compiler characteristics.
-AC_C_CONST
-AC_TYPE_PID_T
-AC_TYPE_SIZE_T
-AC_CHECK_TYPES([u_int32_t])
-
-# Checks for library functions.
-AC_FUNC_CLOSEDIR_VOID
-AC_FUNC_FORK
-AC_PROG_GCC_TRADITIONAL
-## _AIX is offended by rpl_malloc and rpl_realloc
-#AC_FUNC_MALLOC
-#AC_FUNC_REALLOC
-AC_TYPE_SIGNAL
-AC_FUNC_STAT
-AC_CHECK_FUNCS([endpwent isascii memchr memset re_comp regcomp strcasecmp strchr strcspn strdup strerror strrchr strstr strtol issetugid])
-EL_GETPW_R_POSIX
-EL_GETPW_R_DRAFT
-
-AH_BOTTOM([
-#include <sys.h>
-#define SCCSID
-#undef LIBC_SCCS
-])
-
-AC_CONFIG_FILES([Makefile
-                 src/Makefile
-                 doc/Makefile
-                 examples/Makefile])
-AC_OUTPUT

libs/libedit.old/configure.gnu

-#! /bin/sh
-./configure "$@" --disable-shared --with-pic

libs/libedit.old/doc/Makefile.am

-
-EL_MANS = editline.3 editrc.5
-
-man_MANS = $(EL_MANS)
-
-EL_MAN_LINKS = el_init.3 el_end.3 el_reset.3 el_gets.3 el_getc.3 \
-	       el_push.3 el_parse.3 el_set.3 el_get.3 el_source.3 \
-	       el_resize.3 el_line.3 el_insertstr.3 el_deletestr.3 \
-	       el_history_init.3 el_history_end.3 el_history.3 el_tok_init.3 \
-	       el_tok_end.3 el_tok_reset.3 el_tok_line.3 el_tok_str.3
-
-install-data-hook: $(EL_MAN_LINKS)
-
-$(EL_MAN_LINKS):
-	(cd $(DESTDIR)$(man3dir) && rm -f $@ && $(LN_S) editline.3 $@)
-
-$(EL_MANS):
-	if test "$(MANTYPE)" = "mdoc"; then\
-	   cp $(srcdir)/$@.roff $@;\
-        else\
-	   $(AWK) -f $(srcdir)/mdoc2man.awk $(srcdir)/$@.roff > $@ || rm -f $@;\
-	fi; 
-
-uninstall-local: 
-	(cd $(DESTDIR)$(man3dir) && rm -f $(EL_MAN_LINKS))
-
-CLEANFILES = $(EL_MANS)
-EXTRA_DIST = editline.3.roff editrc.5.roff mdoc2man.awk
-
-changelog.txt: ../ChangeLog
-	@sed 's/@/ (at)/g;s/</\&lt;/g;s/>/\&gt;/g;s/è/\&egrave;/g' $(srcdir)/$< > $@;

libs/libedit.old/examples/Makefile.am

-
-LDADD = $(top_builddir)/src/libedit.la
-AM_CFLAGS = -I$(top_srcdir)/src
-
-noinst_PROGRAMS    = test fileman
-
-test_SOURCES    = test.c
-fileman_SOURCES = fileman.c

libs/libedit.old/examples/test.c

-/*	$NetBSD: test.c,v 1.18 2005/06/01 11:37:52 lukem Exp $	*/
-
-/*-
- * Copyright (c) 1992, 1993
- *	The Regents of the University of California.  All rights reserved.
- *
- * This code is derived from software contributed to Berkeley by
- * Christos Zoulas of Cornell University.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the University nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * test.c: A little test program
- */
-#include <stdio.h>
-#include <string.h>
-#include <signal.h>
-#include <sys/wait.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <dirent.h>
-
-#include "histedit.h"
-
-/* from src/sys/sys/cdefs.h */
-#ifndef __UNCONST
-# define __UNCONST(a) ((void *)(unsigned long)(const void *)(a))
-#endif
-
-static int continuation = 0;
-volatile sig_atomic_t gotsig = 0;
-
-static	unsigned char	complete(EditLine *, int);
-	int	main(int, char **);
-static	char   *prompt(EditLine *);
-static	void	sig(int);
-
-static char *
-prompt(EditLine *el)
-{
-	static char a[] = "Edit$ ";
-	static char b[] = "Edit> ";
-
-	return (continuation ? b : a);
-}
-
-static void
-sig(int i)
-{
-	gotsig = i;
-}
-
-static unsigned char
-complete(EditLine *el, int ch)
-{
-	DIR *dd = opendir(".");
-	struct dirent *dp;
-	const char* ptr;
-	const LineInfo *lf = el_line(el);
-	int len;
-
-	/*
-	 * Find the last word
-	 */
-	for (ptr = lf->cursor - 1;
-	    !isspace((unsigned char)*ptr) && ptr > lf->buffer; ptr--)
-		continue;
-	len = lf->cursor - ++ptr;
-
-	for (dp = readdir(dd); dp != NULL; dp = readdir(dd)) {
-		if (len > strlen(dp->d_name))
-			continue;
-		if (strncmp(dp->d_name, ptr, len) == 0) {
-			closedir(dd);
-			if (el_insertstr(el, &dp->d_name[len]) == -1)
-				return (CC_ERROR);
-			else
-				return (CC_REFRESH);
-		}
-	}
-
-	closedir(dd);
-	return (CC_ERROR);
-}
-
-int
-main(int argc, char *argv[])
-{
-	EditLine *el = NULL;
-	int num;
-	const char *buf;
-	Tokenizer *tok;
-#if 0
-	int lastevent = 0;
-#endif
-	int ncontinuation;
-	History *hist;
-	HistEvent ev;
-
-	(void) signal(SIGINT, sig);
-	(void) signal(SIGQUIT, sig);
-	(void) signal(SIGHUP, sig);
-	(void) signal(SIGTERM, sig);
-
-	hist = history_init();		/* Init the builtin history	*/
-					/* Remember 100 events		*/
-	history(hist, &ev, H_SETSIZE, 100);
-
-	tok  = tok_init(NULL);		/* Initialize the tokenizer	*/
-
-					/* Initialize editline		*/
-	el = el_init(*argv, stdin, stdout, stderr);
-
-	el_set(el, EL_EDITOR, "vi");	/* Default editor is vi		*/
-	el_set(el, EL_SIGNAL, 1);	/* Handle signals gracefully	*/
-	el_set(el, EL_PROMPT, prompt);	/* Set the prompt function	*/
-
-			/* Tell editline to use this history interface	*/
-	el_set(el, EL_HIST, history, hist);
-
-					/* Add a user-defined function	*/
-	el_set(el, EL_ADDFN, "ed-complete", "Complete argument", complete);
-
-					/* Bind tab to it 		*/
-	el_set(el, EL_BIND, "^I", "ed-complete", NULL);
-
-	/*
-	 * Bind j, k in vi command mode to previous and next line, instead
-	 * of previous and next history.
-	 */
-	el_set(el, EL_BIND, "-a", "k", "ed-prev-line", NULL);
-	el_set(el, EL_BIND, "-a", "j", "ed-next-line", NULL);
-
-	/*
-	 * Source the user's defaults file.
-	 */
-	el_source(el, NULL);
-
-	while ((buf = el_gets(el, &num)) != NULL && num != 0)  {
-		int ac, cc, co;
-#ifdef DEBUG
-		int i;
-#endif
-		const char **av;
-		const LineInfo *li;
-		li = el_line(el);
-#ifdef DEBUG
-		(void) fprintf(stderr, "==> got %d %s", num, buf);
-		(void) fprintf(stderr, "  > li `%.*s_%.*s'\n",
-		    (li->cursor - li->buffer), li->buffer,
-		    (li->lastchar - 1 - li->cursor),
-		    (li->cursor >= li->lastchar) ? "" : li->cursor);
-
-#endif
-		if (gotsig) {
-			(void) fprintf(stderr, "Got signal %d.\n", gotsig);
-			gotsig = 0;
-			el_reset(el);
-		}
-
-		if (!continuation && num == 1)
-			continue;
-
-		ac = cc = co = 0;
-		ncontinuation = tok_line(tok, li, &ac, &av, &cc, &co);
-		if (ncontinuation < 0) {
-			(void) fprintf(stderr, "Internal error\n");
-			continuation = 0;
-			continue;
-		}
-#ifdef DEBUG
-		(void) fprintf(stderr, "  > nc %d ac %d cc %d co %d\n",
-		    ncontinuation, ac, cc, co);
-#endif
-#if 0
-		if (continuation) {
-			/*
-			 * Append to the right event in case the user
-			 * moved around in history.
-			 */
-			if (history(hist, &ev, H_SET, lastevent) == -1)
-				err(1, "%d: %s", lastevent, ev.str);
-			history(hist, &ev, H_ADD , buf);
-		} else {
-			history(hist, &ev, H_ENTER, buf);
-			lastevent = ev.num;
-		}
-#else
-				/* Simpler */
-		history(hist, &ev, continuation ? H_APPEND : H_ENTER, buf);
-#endif
-
-		continuation = ncontinuation;
-		ncontinuation = 0;
-		if (continuation)
-			continue;
-#ifdef DEBUG
-		for (i = 0; i < ac; i++) {
-			(void) fprintf(stderr, "  > arg# %2d ", i);
-			if (i != cc)
-				(void) fprintf(stderr, "`%s'\n", av[i]);
-			else
-				(void) fprintf(stderr, "`%.*s_%s'\n",
-				    co, av[i], av[i] + co);
-		}
-#endif
-
-		if (strcmp(av[0], "history") == 0) {
-			int rv;
-
-			switch (ac) {
-			case 1:
-				for (rv = history(hist, &ev, H_LAST); rv != -1;
-				    rv = history(hist, &ev, H_PREV))
-					(void) fprintf(stdout, "%4d %s",
-					    ev.num, ev.str);
-				break;
-
-			case 2:
-				if (strcmp(av[1], "clear") == 0)
-					 history(hist, &ev, H_CLEAR);
-				else
-					 goto badhist;
-				break;
-
-			case 3:
-				if (strcmp(av[1], "load") == 0)
-					 history(hist, &ev, H_LOAD, av[2]);
-				else if (strcmp(av[1], "save") == 0)
-					 history(hist, &ev, H_SAVE, av[2]);
-				break;
-
-			badhist:
-			default:
-				(void) fprintf(stderr,
-				    "Bad history arguments\n");
-				break;
-			}
-		} else if (el_parse(el, ac, av) == -1) {
-			switch (fork()) {
-			case 0:
-				execvp(av[0], (char *const *)__UNCONST(av));
-				perror(av[0]);
-				_exit(1);
-				/*NOTREACHED*/
-				break;
-
-			case -1:
-				perror("fork");
-				break;
-
-			default:
-				if (wait(&num) == -1)
-					perror("wait");
-				(void) fprintf(stderr, "Exit %x\n", num);
-				break;
-			}
-		}
-
-		tok_reset(tok);
-	}
-
-	el_end(el);
-	tok_end(tok);
-	history_end(hist);
-
-	return (0);
-}

libs/libedit.old/install-sh

-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2004-10-22.00
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-chmodcmd="$chmodprog 0755"
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test -n "$1"; do
-  case $1 in
-    -c) shift
-        continue;;
-
-    -d) dir_arg=true
-        shift
-        continue;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
-
-    --help) echo "$usage"; exit 0;;
-
-    -m) chmodcmd="$chmodprog $2"
-        shift
-        shift
-        continue;;
-
-    -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
-
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
-
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
-
-    -T) no_target_directory=true
-	shift
-	continue;;
-
-    --version) echo "$0 $scriptversion"; exit 0;;
-
-    *)  # When -d is used, all remaining arguments are directories to create.
-	# When -t is used, the destination is already specified.
-	test -n "$dir_arg$dstarg" && break
-        # Otherwise, the last argument is the destination.  Remove it from $@.
-	for arg
-	do
-          if test -n "$dstarg"; then
-	    # $@ is not empty: it contains at least $arg.
-	    set fnord "$@" "$dstarg"
-	    shift # fnord
-	  fi
-	  shift # arg
-	  dstarg=$arg
-	done
-	break;;
-  esac
-done
-
-if test -z "$1"; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src ;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    src=
-
-    if test -d "$dst"; then
-      mkdircmd=:
-      chmodcmd=
-    else
-      mkdircmd=$mkdirprog
-    fi
-  else
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dstarg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dstarg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst ;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
-	exit 1
-      fi
-      dst=$dst/`basename "$src"`
-    fi
-  fi
-
-  # This sed command emulates the dirname command.
-  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
-
-  # Make sure that the destination directory exists.
-
-  # Skip lots of stat calls in the usual case.
-  if test ! -d "$dstdir"; then
-    defaultIFS='
-	 '
-    IFS="${IFS-$defaultIFS}"
-
-    oIFS=$IFS
-    # Some sh's can't handle IFS=/ for some reason.
-    IFS='%'
-    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-    shift
-    IFS=$oIFS
-
-    pathcomp=
-
-    while test $# -ne 0 ; do
-      pathcomp=$pathcomp$1
-      shift
-      if test ! -d "$pathcomp"; then
-        $mkdirprog "$pathcomp"
-	# mkdir can fail with a `File exist' error in case several
-	# install-sh are creating the directory concurrently.  This
-	# is OK.
-	test -d "$pathcomp" || exit
-      fi
-      pathcomp=$pathcomp/
-    done
-  fi
-
-  if test -n "$dir_arg"; then
-    $doit $mkdircmd "$dst" \
-      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
-  else
-    dstfile=`basename "$dst"`
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-    trap '(exit $?); exit' 1 2 13 15
-
-    # Copy the file name to the temp name.
-    $doit $cpprog "$src" "$dsttmp" &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
-
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dstdir/$dstfile"; then
-	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
-	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-	       || {
-		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		 (exit 1); exit
-	       }
-	     else
-	       :
-	     fi
-	   } &&
-
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-	 }
-    }
-  fi || { (exit 1); exit; }
-done
-
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
-  (exit 0); exit
-}
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:

libs/libedit.old/patches/00-readline.h.patch

---- export/src/editline/readline.h	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/editline/readline.h	2007-03-02 22:38:45.000000000 +0100
-@@ -45,9 +45,11 @@
- typedef char	 *CPFunction(const char *, int);
- typedef char	**CPPFunction(const char *, int, int);
- 
-+typedef void *histdata_t;
-+
- typedef struct _hist_entry {
- 	const char	*line;
--	const char	*data;
-+	histdata_t	*data;
- } HIST_ENTRY;
- 
- typedef struct _keymap_entry {
-@@ -68,7 +70,7 @@
- 
- #ifndef CTRL
- #include <sys/ioctl.h>
--#if !defined(__sun__) && !defined(__hpux__)
-+#ifdef __GLIBC__
- #include <sys/ttydefaults.h>
- #endif
- #ifndef CTRL

libs/libedit.old/patches/01-strlcat.c.patch

---- export/src/strlcat.c	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/strlcat.c	2007-03-02 22:38:45.000000000 +0100
-@@ -17,19 +17,12 @@
-  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-  */
- 
--#if !defined(_KERNEL) && !defined(_STANDALONE)
--#if HAVE_NBTOOL_CONFIG_H
--#include "nbtool_config.h"
--#endif
-+#include <config.h>
- 
--#include <sys/cdefs.h>
- #if defined(LIBC_SCCS) && !defined(lint)
- __RCSID("$NetBSD: strlcat.c,v 1.2 2006/03/30 20:37:51 christos Exp $");
- #endif /* LIBC_SCCS and not lint */
- 
--#ifdef _LIBC
--#include "namespace.h"
--#endif
- #include <sys/types.h>
- #include <assert.h>
- #include <string.h>
-@@ -40,10 +33,6 @@
- # endif
- #endif
- 
--#else
--#include <lib/libkern/libkern.h>
--#endif /* !_KERNEL && !_STANDALONE */
--
- #if !HAVE_STRLCAT
- /*
-  * Appends src to string dst of size siz (unlike strncat, siz is the

libs/libedit.old/patches/02-strlcpy.c.patch

---- export/src/strlcpy.c	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/strlcpy.c	2007-03-02 22:38:45.000000000 +0100
-@@ -17,19 +17,12 @@
-  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-  */
- 
--#if !defined(_KERNEL) && !defined(_STANDALONE)
--#if HAVE_NBTOOL_CONFIG_H
--#include "nbtool_config.h"
--#endif
-+#include <config.h>
- 
--#include <sys/cdefs.h>
- #if defined(LIBC_SCCS) && !defined(lint)
- __RCSID("$NetBSD: strlcpy.c,v 1.2 2006/03/30 20:37:51 christos Exp $");
- #endif /* LIBC_SCCS and not lint */
- 
--#ifdef _LIBC
--#include "namespace.h"
--#endif
- #include <sys/types.h>
- #include <assert.h>
- #include <string.h>
-@@ -39,10 +32,6 @@
- __weak_alias(strlcpy, _strlcpy)
- # endif
- #endif
--#else
--#include <lib/libkern/libkern.h>
--#endif /* !_KERNEL && !_STANDALONE */
--
- 
- #if !HAVE_STRLCPY
- /*

libs/libedit.old/patches/03-vis.c.patch

---- export/src/vis.c	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/vis.c	2007-03-02 22:38:45.000000000 +0100
-@@ -58,12 +58,30 @@
-  * POSSIBILITY OF SUCH DAMAGE.
-  */
- 
--#include <sys/cdefs.h>
-+/* AIX requires this to be the first thing in the file.  */
-+#if defined (_AIX) && !defined (__GNUC__)
-+ #pragma alloca
-+#endif
-+
-+#include <config.h>
-+
-+#ifdef __GNUC__
-+# undef alloca
-+# define alloca(n) __builtin_alloca (n)
-+#else
-+# ifdef HAVE_ALLOCA_H
-+#  include <alloca.h>
-+# else
-+#  ifndef _AIX
-+extern char *alloca ();
-+#  endif
-+# endif
-+#endif
-+
- #if defined(LIBC_SCCS) && !defined(lint)
- __RCSID("$NetBSD: vis.c,v 1.35 2006/08/28 20:42:12 christos Exp $");
- #endif /* LIBC_SCCS and not lint */
- 
--#include "namespace.h"
- #include <sys/types.h>
- 
- #include <assert.h>

libs/libedit.old/patches/04-unvis.c.patch

---- export/src/unvis.c	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/unvis.c	2007-03-02 22:38:45.000000000 +0100
-@@ -29,7 +29,7 @@
-  * SUCH DAMAGE.
-  */
- 
--#include <sys/cdefs.h>
-+#include <config.h>
- #if defined(LIBC_SCCS) && !defined(lint)
- #if 0
- static char sccsid[] = "@(#)unvis.c	8.1 (Berkeley) 6/4/93";
-@@ -38,7 +38,6 @@
- #endif
- #endif /* LIBC_SCCS and not lint */
- 
--#include "namespace.h"
- #include <sys/types.h>
- 
- #include <assert.h>

libs/libedit.old/patches/05-vis.h.patch

---- export/src/vis.h	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/vis.h	2007-03-02 22:38:45.000000000 +0100
-@@ -34,7 +34,7 @@
- #ifndef _VIS_H_
- #define	_VIS_H_
- 
--#include <sys/types.h>
-+#include <config.h>
- 
- /*
-  * to select alternate encoding format
-@@ -72,8 +72,6 @@
-  */
- #define	UNVIS_END	1	/* no more characters */
- 
--#include <sys/cdefs.h>
--
- __BEGIN_DECLS
- char	*vis(char *, int, int, int);
- char	*svis(char *, int, int, int, const char *);
-@@ -84,7 +82,7 @@
- int	strunvis(char *, const char *);
- int	strunvisx(char *, const char *, int);
- #ifndef __LIBC12_SOURCE__
--int	unvis(char *, int, int *, int) __RENAME(__unvis13);
-+int	unvis(char *, int, int *, int);
- #endif
- __END_DECLS
- 

libs/libedit.old/patches/06-fgetln.c.patch

---- export/src/fgetln.c	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/fgetln.c	2007-03-02 22:38:45.000000000 +0100
-@@ -37,6 +37,7 @@
- #endif
- 
- #if !HAVE_FGETLN
-+#include <config.h>
- #include <stdlib.h>
- #ifndef HAVE_NBTOOL_CONFIG_H
- /* These headers are required, but included from nbtool_config.h */

libs/libedit.old/patches/07-el_term.h.patch

---- export/src/el_term.h	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/el_term.h	2007-03-02 22:38:45.000000000 +0100
-@@ -81,6 +81,15 @@
- #define	A_K_EN		5
- #define	A_K_NKEYS	6
- 
-+#ifdef _SUNOS
-+extern int tgetent(char *, const char *);
-+extern int tgetflag(char *);
-+extern int tgetnum(char *);
-+extern int tputs(const char *, int, int (*)(int));
-+extern char* tgoto(const char*, int, int);
-+extern char* tgetstr(char*, char**);
-+#endif
-+
- protected void	term_move_to_line(EditLine *, int);
- protected void	term_move_to_char(EditLine *, int);
- protected void	term_clear_EOL(EditLine *, int);

libs/libedit.old/patches/08-el.c.patch

---- export/src/el.c	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/el.c	2007-03-02 22:38:45.000000000 +0100
-@@ -473,12 +473,17 @@
- 
- 	fp = NULL;
- 	if (fname == NULL) {
--#ifdef HAVE_ISSETUGID
- 		static const char elpath[] = "/.editrc";
-+#ifdef MAXPATHLEN
- 		char path[MAXPATHLEN];
-+#else
-+		char path[4096];
-+#endif
- 
-+#ifdef HAVE_ISSETUGID
- 		if (issetugid())
- 			return (-1);
-+#endif
- 		if ((ptr = getenv("HOME")) == NULL)
- 			return (-1);
- 		if (strlcpy(path, ptr, sizeof(path)) >= sizeof(path))
-@@ -486,14 +491,6 @@
- 		if (strlcat(path, elpath, sizeof(path)) >= sizeof(path))
- 			return (-1);
- 		fname = path;
--#else
--		/*
--		 * If issetugid() is missing, always return an error, in order
--		 * to keep from inadvertently opening up the user to a security
--		 * hole.
--		 */
--		return (-1);
--#endif
- 	}
- 	if (fp == NULL)
- 		fp = fopen(fname, "r");

libs/libedit.old/patches/09-el.h.patch

---- export/src/el.h	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/el.h	2007-03-02 22:38:45.000000000 +0100
-@@ -96,7 +96,7 @@
- #include "tty.h"
- #include "prompt.h"
- #include "key.h"
--#include "term.h"
-+#include "el_term.h"
- #include "refresh.h"
- #include "chared.h"
- #include "common.h"

libs/libedit.old/patches/10-filecomplete.c.patch

---- export/src/filecomplete.c	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/filecomplete.c	2007-03-02 22:38:45.000000000 +0100
-@@ -31,8 +31,27 @@
-  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-  * POSSIBILITY OF SUCH DAMAGE.
-  */
-+  
-+/* AIX requires this to be the first thing in the file.  */
-+#if defined (_AIX) && !defined (__GNUC__)
-+ #pragma alloca
-+#endif
-+
-+#include <config.h>
-+
-+#ifdef __GNUC__
-+# undef alloca
-+# define alloca(n) __builtin_alloca (n)
-+#else
-+# ifdef HAVE_ALLOCA_H
-+#  include <alloca.h>
-+# else
-+#  ifndef _AIX
-+extern char *alloca ();
-+#  endif
-+# endif
-+#endif
- 
--#include "config.h"
- #if !defined(lint) && !defined(SCCSID)
- __RCSID("$NetBSD: filecomplete.c,v 1.10 2006/11/09 16:58:38 christos Exp $");
- #endif /* not lint && not SCCSID */
-@@ -49,14 +68,8 @@
- #include <limits.h>
- #include <errno.h>
- #include <fcntl.h>
--#ifdef HAVE_VIS_H
- #include <vis.h>
--#else
--#include "np/vis.h"
--#endif
--#ifdef HAVE_ALLOCA_H
--#include <alloca.h>
--#endif
-+
- #include "el.h"
- #include "fcns.h"		/* for EL_NUM_FCNS */
- #include "histedit.h"
-@@ -101,11 +114,23 @@
- 		temp[len - 2] = '\0';
- 	}
- 	if (temp[0] == 0) {
-+#ifdef HAVE_GETPW_R_POSIX
- 		if (getpwuid_r(getuid(), &pwres, pwbuf, sizeof(pwbuf), &pass) != 0)
- 			pass = NULL;
-+#elif HAVE_GETPW_R_DRAFT
-+		pass = getpwuid_r(getuid(), &pwres, pwbuf, sizeof(pwbuf));
-+#else 
-+      pass = getpwuid(getuid());
-+#endif
- 	} else {
-+#ifdef HAVE_GETPW_R_POSIX
- 		if (getpwnam_r(temp, &pwres, pwbuf, sizeof(pwbuf), &pass) != 0)
- 			pass = NULL;
-+#elif HAVE_GETPW_R_DRAFT
-+		pass = getpwnam_r(temp, &pwres, pwbuf, sizeof(pwbuf));
-+#else
-+		pass = getpwnam(temp);
-+#endif
- 	}
- 	free(temp);		/* value no more needed */
- 	if (pass == NULL)
-@@ -211,11 +236,8 @@
- 		/* otherwise, get first entry where first */
- 		/* filename_len characters are equal	  */
- 		if (entry->d_name[0] == filename[0]
--#if defined(__SVR4) || defined(__linux__)
-+         /* Some dirents have d_namlen, but it is not portable. */
- 		    && strlen(entry->d_name) >= filename_len
--#else
--		    && entry->d_namlen >= filename_len
--#endif
- 		    && strncmp(entry->d_name, filename,
- 			filename_len) == 0)
- 			break;
-@@ -223,12 +245,8 @@
- 
- 	if (entry) {		/* match found */
- 
--#if defined(__SVR4) || defined(__linux__)
-+      /* Some dirents have d_namlen, but it is not portable. */
- 		len = strlen(entry->d_name);
--#else
--		len = entry->d_namlen;
--#endif
--
- 		temp = malloc(strlen(dirname) + len + 1);
- 		if (temp == NULL)
- 			return NULL;

libs/libedit.old/patches/11-history.c.patch

---- export/src/history.c	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/history.c	2007-03-02 22:38:45.000000000 +0100
-@@ -47,11 +47,7 @@
- #include <string.h>
- #include <stdlib.h>
- #include <stdarg.h>
--#ifdef HAVE_VIS_H
- #include <vis.h>
--#else
--#include "np/vis.h"
--#endif
- #include <sys/stat.h>
- 
- static const char hist_cookie[] = "_HiStOrY_V2_\n";

libs/libedit.old/patches/12-readline.c.patch

---- export/src/readline.c	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/readline.c	2007-03-02 22:38:45.000000000 +0100
-@@ -32,7 +32,26 @@
-  * POSSIBILITY OF SUCH DAMAGE.
-  */
- 
--#include "config.h"
-+/* AIX requires this to be the first thing in the file.  */
-+#if defined (_AIX) && !defined (__GNUC__)
-+ #pragma alloca
-+#endif
-+
-+#include <config.h>
-+
-+#ifdef __GNUC__
-+# undef alloca
-+# define alloca(n) __builtin_alloca (n)
-+#else
-+# ifdef HAVE_ALLOCA_H
-+#  include <alloca.h>
-+# else
-+#  ifndef _AIX
-+extern char *alloca ();
-+#  endif
-+# endif
-+#endif
-+
- #if !defined(lint) && !defined(SCCSID)
- __RCSID("$NetBSD: readline.c,v 1.70 2006/11/24 00:01:17 christos Exp $");
- #endif /* not lint && not SCCSID */
-@@ -50,18 +69,11 @@
- #include <errno.h>
- #include <fcntl.h>
- #include <setjmp.h>
--#ifdef HAVE_VIS_H
- #include <vis.h>
--#else
--#include "np/vis.h"
--#endif
--#ifdef HAVE_ALLOCA_H
--#include <alloca.h>
--#endif
- #include "el.h"
- #include "fcns.h"		/* for EL_NUM_FCNS */
- #include "histedit.h"
--#include "readline/readline.h"
-+#include "editline/readline.h"
- #include "filecomplete.h"
- 
- void rl_prep_terminal(int);
-@@ -198,7 +210,7 @@
- 		return (HIST_ENTRY *) NULL;
- 
- 	rl_he.line = ev.str;
--	rl_he.data = NULL;
-+	rl_he.data = (histdata_t) &(ev.num);
- 
- 	return (&rl_he);
- }
-@@ -1437,8 +1449,7 @@
- char *
- username_completion_function(const char *text, int state)
- {
--	struct passwd *pwd, pwres;
--	char pwbuf[1024];
-+	struct passwd *pwd;
- 
- 	if (text[0] == '\0')
- 		return (NULL);
-@@ -1449,9 +1460,9 @@
- 	if (state == 0)
- 		setpwent();
- 
--	while (getpwent_r(&pwres, pwbuf, sizeof(pwbuf), &pwd) == 0
--	    && pwd != NULL && text[0] == pwd->pw_name[0]
--	    && strcmp(text, pwd->pw_name) == 0);
-+   while ((pwd = getpwent())
-+		&& pwd != NULL && text[0] == pwd->pw_name[0]
-+		&& strcmp(text, pwd->pw_name) == 0);
- 
- 	if (pwd == NULL) {
- 		endpwent();

libs/libedit.old/patches/13-search.c.patch

---- export/src/search.c	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/search.c	2007-03-02 22:38:45.000000000 +0100
-@@ -45,6 +45,7 @@
-  * search.c: History and character search functions
-  */
- #include <stdlib.h>
-+#include <sys/types.h>
- #if defined(REGEX)
- #include <regex.h>
- #elif defined(REGEXP)

libs/libedit.old/patches/14-sys.h.patch

---- export/src/sys.h	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/sys.h	2007-03-02 22:38:45.000000000 +0100
-@@ -40,6 +40,8 @@
- #ifndef _h_sys
- #define	_h_sys
- 
-+#include <config.h>
-+
- #ifdef HAVE_SYS_CDEFS_H
- #include <sys/cdefs.h>
- #endif
-@@ -48,6 +50,14 @@
- # define __attribute__(A)
- #endif
- 
-+#ifndef __P
-+# define __P(x) x
-+#endif
-+
-+#ifndef _DIAGASSERT
-+# define _DIAGASSERT(x)
-+#endif
-+
- #ifndef __BEGIN_DECLS
- # ifdef  __cplusplus
- #  define __BEGIN_DECLS  extern "C" {
-@@ -71,6 +81,10 @@
- 			/* When we want to hide everything	*/
- #endif
- 
-+#ifndef HAVE_U_INT32_T
-+typedef unsigned int  u_int32_t;
-+#endif
-+
- #ifndef _PTR_T
- # define _PTR_T
- typedef void	*ptr_t;

libs/libedit.old/patches/15-term.c.patch

---- export/src/term.c	2007-03-02 22:26:59.000000000 +0100
-+++ ../src/term.c	2007-03-02 22:38:45.000000000 +0100
-@@ -51,19 +51,18 @@
- #include <string.h>
- #include <stdlib.h>
- #include <unistd.h>
--#ifdef HAVE_TERMCAP_H
--#include <termcap.h>
--#endif
-+
- #ifdef HAVE_CURSES_H
--#include <curses.h>
--#endif
--#ifdef HAVE_NCURSES_H
--#include <ncurses.h>
-+# include <curses.h>
-+#elif HAVE_NCURSES_H
-+# include <ncurses.h>
- #endif
-+
- /* Solaris's term.h does horrid things. */
--#if (defined(HAVE_TERM_H) && !defined(SUNOS))
--#include <term.h>
-+#if (defined(HAVE_TERM_H) && !defined(_SUNOS))
-+# include <term.h>
- #endif
-+
- #include <sys/types.h>
- #include <sys/ioctl.h>
- 

libs/libedit.old/patches/patches_apply.sh

-#!/bin/bash
-
-## apply patches to the ./export hierarchy
-
-for patch in *.patch
-do
-   patch -d export -p1 < $patch
-done

libs/libedit.old/patches/timestamp.cvsexport

-20070302

libs/libedit.old/src/shlib_version

-#	$NetBSD: shlib_version,v 1.16 2006/11/24 00:01:17 christos Exp $
-#	Remember to update distrib/sets/lists/base/shl.* when changing
-#
-major=2
-minor=10