Addition of libdingaling and mod_dingaling to enable jingle support

git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@995 d0543943-73ff-0310-b7d9-9358b9ac24b2

conf/freeswitch.conf

@@ -25,6 +25,7 @@ load => mod_iax
 ;load => mod_portaudio
 ;load => mod_woomera
 ;load => mod_wanpipe
+;load => mod_dingaling
 
 ; Applications
 load => mod_bridgecall
@@ -198,3 +199,17 @@ base => dc=freeswitch,dc=org
 ; call the freeswitch conference
 888 => bridge iax/guest@66.250.68.194/888
 
+[+dingaling.conf]
+[settings]
+debug => 0
+codec_prefs => PCMU
+
+[interface]
+ name => google
+ login => myjabberid@myjabberserver.com/me
+ password => mypass
+ dialplan => demo
+ message => Jingle all the way
+ generate_silence => yes
+ ip => 0.0.0.0
+ exten => 1000

libs/libdingaling/AUTHORS

+The Initial Developer of the Original Code is
+Anthony Minessale II <anthmct@yahoo.com>
+Portions created by the Initial Developer are Copyright (C)
+the Initial Developer. All Rights Reserved.
+
+The PRIMARY AUTHORS are (and/or have been):
+
+ Anthony Minessale II <anthmct@yahoo.com> - Primary developer of all core components
+ 	and many of the included modules.  Much of freeswitch is based on his work.
+ 
+ Michael Jerris <mike@jerris.com> - Windows porter and responsible for the 
+  windows\msvc build system.
+
+
+And here is an inevitably incomplete list of MUCH-APPRECIATED CONTRIBUTORS --
+people who have submitted patches, reported bugs, and generally made Freeswitch
+that much better:
+

libs/libdingaling/INSTALL

+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
+
+   This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+   Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+`configure' Invocation
+======================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+

libs/libdingaling/Makefile.am

+EXTRA_DIST =
+SUBDIRS = 
+AUTOMAKE_OPTS= gnu
+MAKE=make
+NAME=dingaling
+PREFIX=$(prefix)
+AM_CC=gcc
+AM_CFLAGS	= -Wall -Werror -I./src -I$(prefix)/include
+AM_CPPFLAGS = $(AM_CFLAGS)
+AM_LDFLAGS = -liksemel
+
+APR_CONFIG=$(prefix)/bin/apr-1-config
+APU_CONFIG=$(prefix)/bin/apu-1-config
+AM_CFLAGS  += -I$(PREFIX)/include $(shell $(APR_CONFIG) --cflags --cppflags --includes)
+AM_LDFLAGS += -L$(PREFIX)/lib
+AM_LDFLAGS += $(shell $(APR_CONFIG) --link-ld --libs )
+AM_CFLAGS  += $(shell $(APU_CONFIG) --includes) 
+AM_LDFLAGS += $(shell $(APU_CONFIG) --link-ld --libs )
+
+lib_LTLIBRARIES		= libdingaling.la
+libdingaling_la_SOURCES	= src/libdingaling.c src/stun_parser.c
+libdingaling_la_CFLAGS	= $(AM_CFLAGS)
+libdingaling_la_LDFLAGS	= 
+
+library_includedir	= $(prefix)/include
+library_include_HEADERS = src/libdingaling.h src/stun_parser.h
+
+
+
+dox:
+	cd docs && doxygen $(PWD)/docs/Doxygen.conf
+
+doxclean: 
+	rm -fr docs/html/ docs/man/ docs/perlmod/ docs/xml/

libs/libdingaling/NEWS

+Developed on UNIX where the motto is "no news is good news!".

libs/libdingaling/README

+Install is common:
+
+./configure --with-prefix=<desired prefix>
+make
+make install
+
+
+

libs/libdingaling/compile

+#! /bin/sh
+# Wrapper for compilers which do not understand `-c -o'.
+
+scriptversion=2005-05-14.22
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand `-c -o'.
+Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file `INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+esac
+
+ofile=
+cfile=
+eat=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as `compile cc -o foo foo.c'.
+	# So we strip `-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no `-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # `.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use `[/.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

libs/libdingaling/configure.in

+#                                               -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.59)
+AC_INIT(FULL-PACKAGE-NAME, VERSION, BUG-REPORT-ADDRESS)
+AM_INIT_AUTOMAKE(libdingaling,0.1)
+AC_CONFIG_SRCDIR([src])
+#AC_CONFIG_HEADER([])
+
+# Checks for programs.
+AC_PROG_CC
+AC_PROG_MAKE_SET
+AC_PROG_LIBTOOL
+AC_PROG_INSTALL
+
+# Checks for header files.
+AC_HEADER_DIRENT
+AC_HEADER_STDC
+#AC_CHECK_HEADERS([arpa/inet.h fcntl.h netdb.h netinet/in.h stdlib.h string.h sys/ioctl.h sys/socket.h sys/time.h unistd.h])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_C_INLINE
+AC_TYPE_SIZE_T
+AC_HEADER_TIME
+AC_STRUCT_TM
+
+# Checks for library functions.
+AC_PROG_GCC_TRADITIONAL
+AC_FUNC_MALLOC
+AC_TYPE_SIGNAL
+AC_FUNC_STRFTIME
+#AC_CHECK_FUNCS([gethostname gettimeofday localtime_r memmove memset socket strcasecmp strchr strdup strncasecmp strstr])
+
+AC_CONFIG_FILES([Makefile])
+
+AC_OUTPUT

libs/libdingaling/doc

+http://iksemel.jabberstudio.org/iksemel.html

libs/libdingaling/docs/Doxygen.conf

+# Doxyfile 1.4.6
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+PROJECT_NAME           = LibDingaLing
+PROJECT_NUMBER         = 
+OUTPUT_DIRECTORY       = .
+CREATE_SUBDIRS         = NO
+OUTPUT_LANGUAGE        = English
+USE_WINDOWS_ENCODING   = YES
+BRIEF_MEMBER_DESC      = YES
+REPEAT_BRIEF           = YES
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+ALWAYS_DETAILED_SEC    = NO
+INLINE_INHERITED_MEMB  = NO
+FULL_PATH_NAMES        = NO
+STRIP_FROM_PATH        = 
+STRIP_FROM_INC_PATH    = 
+SHORT_NAMES            = NO
+JAVADOC_AUTOBRIEF      = NO
+MULTILINE_CPP_IS_BRIEF = NO
+DETAILS_AT_TOP         = NO
+INHERIT_DOCS           = YES
+SEPARATE_MEMBER_PAGES  = NO
+TAB_SIZE               = 8
+ALIASES                = 
+OPTIMIZE_OUTPUT_FOR_C  = YES
+OPTIMIZE_OUTPUT_JAVA   = NO
+DISTRIBUTE_GROUP_DOC   = NO
+SUBGROUPING            = YES
+IGNORE_PREFIX          = ldl_
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+EXTRACT_ALL            = NO
+EXTRACT_PRIVATE        = NO
+EXTRACT_STATIC         = NO
+EXTRACT_LOCAL_CLASSES  = YES
+EXTRACT_LOCAL_METHODS  = NO
+HIDE_UNDOC_MEMBERS     = YES
+HIDE_UNDOC_CLASSES     = YES
+HIDE_FRIEND_COMPOUNDS  = NO
+HIDE_IN_BODY_DOCS      = NO
+INTERNAL_DOCS          = NO
+CASE_SENSE_NAMES       = NO
+HIDE_SCOPE_NAMES       = NO
+SHOW_INCLUDE_FILES     = YES
+INLINE_INFO            = YES
+SORT_MEMBER_DOCS       = YES
+SORT_BRIEF_DOCS        = NO
+SORT_BY_SCOPE_NAME     = NO
+GENERATE_TODOLIST      = YES
+GENERATE_TESTLIST      = YES
+GENERATE_BUGLIST       = YES
+GENERATE_DEPRECATEDLIST= YES
+ENABLED_SECTIONS       = 
+MAX_INITIALIZER_LINES  = 30
+SHOW_USED_FILES        = YES
+SHOW_DIRECTORIES       = NO
+FILE_VERSION_FILTER    = 
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+QUIET                  = NO
+WARNINGS               = YES
+WARN_IF_UNDOCUMENTED   = YES
+WARN_IF_DOC_ERROR      = YES
+WARN_NO_PARAMDOC       = NO
+WARN_FORMAT            = "$file:$line: $text"
+WARN_LOGFILE           = 
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+INPUT                  = ../src 
+FILE_PATTERNS          = *.c \
+                         *.cc \
+                         *.cxx \
+                         *.cpp \
+                         *.c++ \
+                         *.d \
+                         *.java \
+                         *.ii \
+                         *.ixx \
+                         *.ipp \
+                         *.i++ \
+                         *.inl \
+                         *.h \
+                         *.hh \
+                         *.hxx \
+                         *.hpp \
+                         *.h++ \
+                         *.idl \
+                         *.odl \
+                         *.cs \
+                         *.php \
+                         *.php3 \
+                         *.inc \
+                         *.m \
+                         *.mm \
+                         *.dox \
+                         *.py
+RECURSIVE              = NO
+EXCLUDE                = 
+EXCLUDE_SYMLINKS       = NO
+EXCLUDE_PATTERNS       = 
+EXAMPLE_PATH           = 
+EXAMPLE_PATTERNS       = 
+EXAMPLE_RECURSIVE      = NO
+IMAGE_PATH             = 
+INPUT_FILTER           = 
+FILTER_PATTERNS        = 
+FILTER_SOURCE_FILES    = NO
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+SOURCE_BROWSER         = NO
+INLINE_SOURCES         = YES
+STRIP_CODE_COMMENTS    = YES
+REFERENCED_BY_RELATION = YES
+REFERENCES_RELATION    = YES
+USE_HTAGS              = YES
+VERBATIM_HEADERS       = NO
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+ALPHABETICAL_INDEX     = YES
+COLS_IN_ALPHA_INDEX    = 1
+IGNORE_PREFIX          = ldl_
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+GENERATE_HTML          = YES
+HTML_OUTPUT            = html
+HTML_FILE_EXTENSION    = .html
+HTML_HEADER            = 
+HTML_FOOTER            = 
+HTML_STYLESHEET        = 
+HTML_ALIGN_MEMBERS     = YES
+GENERATE_HTMLHELP      = NO
+CHM_FILE               = libDingaLing.chm
+HHC_LOCATION           = 
+GENERATE_CHI           = YES
+BINARY_TOC             = NO
+TOC_EXPAND             = NO
+DISABLE_INDEX          = NO
+ENUM_VALUES_PER_LINE   = 4
+GENERATE_TREEVIEW      = YES
+TREEVIEW_WIDTH         = 250
+
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+GENERATE_LATEX         = NO
+LATEX_OUTPUT           = latex
+LATEX_CMD_NAME         = latex
+MAKEINDEX_CMD_NAME     = makeindex
+COMPACT_LATEX          = NO
+PAPER_TYPE             = a4wide
+EXTRA_PACKAGES         = 
+LATEX_HEADER           = 
+PDF_HYPERLINKS         = NO
+USE_PDFLATEX           = NO
+LATEX_BATCHMODE        = NO
+LATEX_HIDE_INDICES     = NO
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+GENERATE_RTF           = NO
+RTF_OUTPUT             = rtf
+COMPACT_RTF            = NO
+RTF_HYPERLINKS         = NO
+RTF_STYLESHEET_FILE    = 
+RTF_EXTENSIONS_FILE    = 
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+GENERATE_MAN           = YES
+MAN_OUTPUT             = man
+MAN_EXTENSION          = .3
+MAN_LINKS              = NO
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+GENERATE_XML           = YES
+XML_OUTPUT             = xml
+XML_SCHEMA             = 
+XML_DTD                = 
+XML_PROGRAMLISTING     = YES
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+GENERATE_AUTOGEN_DEF   = NO
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+GENERATE_PERLMOD       = YES
+PERLMOD_LATEX          = NO
+PERLMOD_PRETTY         = YES
+PERLMOD_MAKEVAR_PREFIX = 
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor   
+#---------------------------------------------------------------------------
+ENABLE_PREPROCESSING   = YES
+MACRO_EXPANSION        = YES
+EXPAND_ONLY_PREDEF     = NO
+SEARCH_INCLUDES        = NO
+INCLUDE_PATH           = 
+INCLUDE_FILE_PATTERNS  = *.h
+PREDEFINED             = SWITCH_DECLARE(x)=x \
+					APR_DECLARE(x)=x \
+					DoxyDefine(x)=x
+					
+EXPAND_AS_DEFINED      = NO
+SKIP_FUNCTION_MACROS   = NO
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references   
+#---------------------------------------------------------------------------
+TAGFILES               = 
+GENERATE_TAGFILE       = 
+ALLEXTERNALS           = NO
+EXTERNAL_GROUPS        = YES
+PERL_PATH              = /usr/bin/perl
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool   
+#---------------------------------------------------------------------------
+CLASS_DIAGRAMS         = YES
+HIDE_UNDOC_RELATIONS   = YES
+HAVE_DOT               = YES
+CLASS_GRAPH            = YES
+COLLABORATION_GRAPH    = YES
+GROUP_GRAPHS           = YES
+UML_LOOK               = YES
+TEMPLATE_RELATIONS     = YES
+INCLUDE_GRAPH          = YES
+INCLUDED_BY_GRAPH      = YES
+CALL_GRAPH             = YES
+GRAPHICAL_HIERARCHY    = YES
+DIRECTORY_GRAPH        = YES
+DOT_IMAGE_FORMAT       = jpg
+DOT_PATH               = 
+DOTFILE_DIRS           = 
+MAX_DOT_GRAPH_WIDTH    = 1024
+MAX_DOT_GRAPH_HEIGHT   = 1024
+MAX_DOT_GRAPH_DEPTH    = 1000
+DOT_TRANSPARENT        = NO
+DOT_MULTI_TARGETS      = NO
+GENERATE_LEGEND        = YES
+DOT_CLEANUP            = YES
+#---------------------------------------------------------------------------
+# Configuration::additions related to the search engine   
+#---------------------------------------------------------------------------
+SEARCHENGINE           = NO

libs/libdingaling/src/dingaling.def

+EXPORTS
+stun_random_string
+stun_packet_parse
+stun_value_to_name
+stun_packet_attribute_get_mapped_address
+stun_packet_attribute_get_username
+stun_packet_build_header
+stun_packet_attribute_add_username
+stun_packet_attribute_add_binded_address
+ldl_session_get_caller
+ldl_session_get_ip
+ldl_session_set_private
+ldl_session_get_private
+ldl_session_terminate
+ldl_handle_get_private
+ldl_session_candidates
+ldl_session_describe
+ldl_session_get_state
+ldl_session_get_candidates
+ldl_session_get_payloads
+ldl_global_init
+ldl_global_destroy
+ldl_global_set_log_stream
+ldl_handle_init
+ldl_handle_run
+ldl_handle_destroy
+ldl_handle_set_log_stream
+ldl_session_create
+ldl_handle_probe
+ldl_handle_ready
+ldl_session_get_id
\ No newline at end of file

libs/libdingaling/src/ldl_compat.h

+/* 
+ * libDingaLing XMPP Jingle Library
+ * Copyright (C) 2005/2006, Anthony Minessale II <anthmct@yahoo.com>
+ *
+ * Version: MPL 1.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is libDingaLing XMPP Jingle Library
+ *
+ * The Initial Developer of the Original Code is
+ * Anthony Minessale II <anthmct@yahoo.com>
+ * Portions created by the Initial Developer are Copyright (C)
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ * 
+ * Anthony Minessale II <anthmct@yahoo.com>
+ *
+ * ldl_compat.h -- Platform Compatability Header File
+ *
+ */
+/*! \file ldl_compat.h
+    \brief Platform Compatability Header File
+*/
+#ifndef LDL_COMPAT_H
+#define LDL_COMPAT_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+#ifdef __STUPIDFORMATBUG__
+}
+#endif
+
+
+#ifdef _MSC_VER
+#ifndef uint32_t
+typedef unsigned __int8		uint8_t;
+typedef unsigned __int16	uint16_t;
+typedef unsigned __int32	uint32_t;
+typedef unsigned __int64    uint64_t;
+typedef __int8		int8_t;
+typedef __int16		int16_t;
+typedef __int32		int32_t;
+typedef __int64		int64_t;
+typedef unsigned long	in_addr_t;
+#endif
+#define snprintf _snprintf
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

modules.conf.in

@@ -16,6 +16,7 @@ dialplans/mod_pcre
 #directories/mod_ldap
 endpoints/mod_exosip
 endpoints/mod_iax
+#endpoints/mod_dingaling
 #endpoints/mod_opal
 #endpoints/mod_portaudio
 #endpoints/mod_wanpipe