Skip to content

F
freeswitch
提交 82d79185 authored 作者: Anthony Minessale's avatar Anthony Minessale
浏览文件
操作

solaris port of libteletone. part 2/2 

git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@2873 d0543943-73ff-0310-b7d9-9358b9ac24b2
上级 561009ae
全部展开 隐藏空白字符变更
内嵌 并排
正在显示 包含 4757 行增加 和 2430 行删除
libs/libteletone/INSTALL
浏览文件 @ 82d79185
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software Installation Instructions
Foundation, Inc. *************************
This file is free documentation; the Free Software Foundation gives Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
Software Foundation, Inc.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it. unlimited permission to copy, distribute and modify it.
Basic Installation Basic Installation
================== ==================
These are generic installation instructions. These are generic installation instructions.
The `configure' shell script attempts to guess correct values for The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses various system-dependent variables used during compilation. It uses
...@@ -67,9 +70,9 @@ The simplest way to compile this package is: ...@@ -67,9 +70,9 @@ The simplest way to compile this package is:
Compilers and Options Compilers and Options
===================== =====================
Some systems require unusual options for compilation or linking that Some systems require unusual options for compilation or linking that the
the `configure' script does not know about. Run `./configure --help' `configure' script does not know about. Run `./configure --help' for
for details on some of the pertinent environment variables. details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here by setting variables in the command line or in the environment. Here
...@@ -82,7 +85,7 @@ is an example: ...@@ -82,7 +85,7 @@ is an example:
Compiling For Multiple Architectures Compiling For Multiple Architectures
==================================== ====================================
You can compile the package for more than one kind of computer at the You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the supports the `VPATH' variable, such as GNU `make'. `cd' to the
...@@ -99,19 +102,19 @@ for another architecture. ...@@ -99,19 +102,19 @@ for another architecture.
Installation Names Installation Names
================== ==================
By default, `make install' will install the package's files in By default, `make install' installs the package's commands under
`/usr/local/bin', `/usr/local/man', etc. You can specify an `/usr/local/bin', include files under `/usr/local/include', etc. You
installation prefix other than `/usr/local' by giving `configure' the can specify an installation prefix other than `/usr/local' by giving
option `--prefix=PATH'. `configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you architecture-specific files and architecture-independent files. If you
give `configure' the option `--exec-prefix=PATH', the package will use pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PATH as the prefix for installing programs and libraries. PREFIX as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix. Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give In addition, if you use an unusual directory layout you can give
options like `--bindir=PATH' to specify different values for particular options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them. you can set and what kinds of files go in them.
...@@ -122,7 +125,7 @@ option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. ...@@ -122,7 +125,7 @@ option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features Optional Features
================= =================
Some packages pay attention to `--enable-FEATURE' options to Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package. `configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The is something like `gnu-as' or `x' (for the X Window System). The
...@@ -137,11 +140,11 @@ you can use the `configure' options `--x-includes=DIR' and ...@@ -137,11 +140,11 @@ you can use the `configure' options `--x-includes=DIR' and
Specifying the System Type Specifying the System Type
========================== ==========================
There may be some features `configure' cannot figure out There may be some features `configure' cannot figure out automatically,
automatically, but needs to determine by the type of machine the package but needs to determine by the type of machine the package will run on.
will run on. Usually, assuming the package is built to be run on the Usually, assuming the package is built to be run on the _same_
_same_ architectures, `configure' can figure that out, but if it prints architectures, `configure' can figure that out, but if it prints a
a message saying it cannot guess the machine type, give it the message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system `--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form: type, such as `sun4', or a canonical name which has the form:
...@@ -156,7 +159,7 @@ where SYSTEM can have one of these forms: ...@@ -156,7 +159,7 @@ where SYSTEM can have one of these forms:
need to know the machine type. need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should If you are _building_ compiler tools for cross-compiling, you should
use the `--target=TYPE' option to select the type of system they will use the option `--target=TYPE' to select the type of system they will
produce code for. produce code for.
If you want to _use_ a cross compiler, that generates code for a If you want to _use_ a cross compiler, that generates code for a
...@@ -167,9 +170,9 @@ eventually be run) with `--host=TYPE'. ...@@ -167,9 +170,9 @@ eventually be run) with `--host=TYPE'.
Sharing Defaults Sharing Defaults
================ ================
If you want to set default values for `configure' scripts to share, If you want to set default values for `configure' scripts to share, you
you can create a site shell script called `config.site' that gives can create a site shell script called `config.site' that gives default
default values for variables like `CC', `cache_file', and `prefix'. values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then `configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the `PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script. `CONFIG_SITE' environment variable to the location of the site script.
...@@ -178,7 +181,7 @@ A warning: not all `configure' scripts look for a site script. ...@@ -178,7 +181,7 @@ A warning: not all `configure' scripts look for a site script.
Defining Variables Defining Variables
================== ==================
Variables not defined in a site shell script can be set in the Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set variables may be lost. In order to avoid this problem, you should set
...@@ -186,14 +189,18 @@ them in the `configure' command line, using `VAR=value'. For example: ...@@ -186,14 +189,18 @@ them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc ./configure CC=/usr/local2/bin/gcc
will cause the specified gcc to be used as the C compiler (unless it is causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script). overridden in the site shell script). Here is a another example:
/bin/bash ./configure CONFIG_SHELL=/bin/bash
Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
configuration-related scripts to be executed by `/bin/bash'.
`configure' Invocation `configure' Invocation
====================== ======================
`configure' recognizes the following options to control how it `configure' recognizes the following options to control how it operates.
operates.
`--help' `--help'
`-h' `-h'
......
libs/libteletone/Makefile.am
浏览文件 @ 82d79185
EXTRA_DIST = EXTRA_DIST =
SUBDIRS = SUBDIRS =
AUTOMAKE_OPTS= gnu AUTOMAKE_OPTS= gnu
NAME=teletone NAME=teletone
AM_CFLAGS = new_AM_CFLAGS -I./src AM_CFLAGS = $(new_AM_CFLAGS) -I./src
AM_CPPFLAGS = $(AM_CFLAGS) AM_CPPFLAGS = $(AM_CFLAGS)
AM_LDFLAGS = -lm AM_LDFLAGS = -lm
lib_LTLIBRARIES = libteletone.la lib_LTLIBRARIES = libteletone.la
libteletone_la_SOURCES = src/libteletone_generate.c src/libteletone_detect.c libteletone_la_SOURCES = src/libteletone_generate.c src/libteletone_detect.c
libteletone_la_CFLAGS = $(AM_CFLAGS) libteletone_la_CFLAGS = $(AM_CFLAGS)
libteletone_la_LDFLAGS = libteletone_la_LDFLAGS =
library_includedir = $(prefix)/include library_includedir = $(prefix)/include
library_include_HEADERS = src/libteletone.h src/libteletone_detect.h src/libteletone_generate.h library_include_HEADERS = src/libteletone.h src/libteletone_detect.h src/libteletone_generate.h
dox: dox:
cd docs && doxygen $(PWD)/docs/Doxygen.conf cd docs && doxygen $(PWD)/docs/Doxygen.conf
libs/libteletone/Makefile.in
浏览文件 @ 82d79185
# Makefile.in generated by automake 1.9.2 from Makefile.am. # Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@ # @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004 Free Software Foundation, Inc. # 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation # This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it, # gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved. # with or without modifications, as long as this notice is preserved.
...@@ -15,8 +15,6 @@ ...@@ -15,8 +15,6 @@
@SET_MAKE@ @SET_MAKE@
SOURCES = $(libteletone_la_SOURCES)
srcdir = @srcdir@ srcdir = @srcdir@
top_srcdir = @top_srcdir@ top_srcdir = @top_srcdir@
VPATH = @srcdir@ VPATH = @srcdir@
...@@ -42,16 +40,23 @@ host_triplet = @host@ ...@@ -42,16 +40,23 @@ host_triplet = @host@
DIST_COMMON = README $(am__configure_deps) $(library_include_HEADERS) \ DIST_COMMON = README $(am__configure_deps) $(library_include_HEADERS) \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
compile config.guess config.sub depcomp install-sh ltmain.sh \ build/compile build/config.guess build/config.sub \
missing mkinstalldirs build/depcomp build/install-sh build/ltmain.sh build/missing
subdir = . subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.in am__aclocal_m4_deps = \
$(top_srcdir)/build/config/ax_compiler_vendor.m4 \
$(top_srcdir)/build/config/ax_cflags_warn_all_ansi.m4 \
$(top_srcdir)/build/config/ax_cc_maxopt.m4 \
$(top_srcdir)/build/config/ax_check_compiler_flags.m4 \
$(top_srcdir)/build/config/ac_gcc_archflag.m4 \
$(top_srcdir)/build/config/ac_gcc_x86_cpuid.m4 \
$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4) $(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno configure.status.lineno configure.lineno configure.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES = CONFIG_CLEAN_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \ am__vpath_adj = case $$p in \
...@@ -68,15 +73,15 @@ am_libteletone_la_OBJECTS = libteletone_la-libteletone_generate.lo \ ...@@ -68,15 +73,15 @@ am_libteletone_la_OBJECTS = libteletone_la-libteletone_generate.lo \
libteletone_la-libteletone_detect.lo libteletone_la-libteletone_detect.lo
libteletone_la_OBJECTS = $(am_libteletone_la_OBJECTS) libteletone_la_OBJECTS = $(am_libteletone_la_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) DEFAULT_INCLUDES = -I. -I$(srcdir)
depcomp = $(SHELL) $(top_srcdir)/depcomp depcomp = $(SHELL) $(top_srcdir)/build/depcomp
am__depfiles_maybe = depfiles am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
$(AM_CFLAGS) $(CFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC) CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@ $(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(libteletone_la_SOURCES) SOURCES = $(libteletone_la_SOURCES)
DIST_SOURCES = $(libteletone_la_SOURCES) DIST_SOURCES = $(libteletone_la_SOURCES)
...@@ -150,11 +155,14 @@ PACKAGE_STRING = @PACKAGE_STRING@ ...@@ -150,11 +155,14 @@ PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@ PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@ PATH_SEPARATOR = @PATH_SEPARATOR@
PRTDIAG = @PRTDIAG@
RANLIB = @RANLIB@ RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@ SET_MAKE = @SET_MAKE@
SHELL = @SHELL@ SHELL = @SHELL@
STRIP = @STRIP@ STRIP = @STRIP@
VERSION = @VERSION@ VERSION = @VERSION@
WANT_DEBUG_FALSE = @WANT_DEBUG_FALSE@
WANT_DEBUG_TRUE = @WANT_DEBUG_TRUE@
ac_ct_AR = @ac_ct_AR@ ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@ ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@ ac_ct_CXX = @ac_ct_CXX@
...@@ -191,6 +199,8 @@ libexecdir = @libexecdir@ ...@@ -191,6 +199,8 @@ libexecdir = @libexecdir@
localstatedir = @localstatedir@ localstatedir = @localstatedir@
mandir = @mandir@ mandir = @mandir@
mkdir_p = @mkdir_p@ mkdir_p = @mkdir_p@
new_AM_CFLAGS = @new_AM_CFLAGS@
new_AM_LDFLAGS = @new_AM_LDFLAGS@
oldincludedir = @oldincludedir@ oldincludedir = @oldincludedir@
prefix = @prefix@ prefix = @prefix@
program_transform_name = @program_transform_name@ program_transform_name = @program_transform_name@
...@@ -202,8 +212,7 @@ EXTRA_DIST = ...@@ -202,8 +212,7 @@ EXTRA_DIST =
SUBDIRS = SUBDIRS =
AUTOMAKE_OPTS = gnu AUTOMAKE_OPTS = gnu
NAME = teletone NAME = teletone
AM_CC = gcc AM_CFLAGS = $(new_AM_CFLAGS) -I./src
AM_CFLAGS = -D_GNU_SOURCE -Wall -Werror -ansi -pedantic -g -O2 -I./src
AM_CPPFLAGS = $(AM_CFLAGS) AM_CPPFLAGS = $(AM_CFLAGS)
AM_LDFLAGS = -lm AM_LDFLAGS = -lm
lib_LTLIBRARIES = libteletone.la lib_LTLIBRARIES = libteletone.la
...@@ -310,18 +319,18 @@ distclean-compile: ...@@ -310,18 +319,18 @@ distclean-compile:
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
libteletone_la-libteletone_generate.lo: src/libteletone_generate.c libteletone_la-libteletone_generate.lo: src/libteletone_generate.c
@am__fastdepCC_TRUE@ if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libteletone_la_CFLAGS) $(CFLAGS) -MT libteletone_la-libteletone_generate.lo -MD -MP -MF "$(DEPDIR)/libteletone_la-libteletone_generate.Tpo" -c -o libteletone_la-libteletone_generate.lo `test -f 'src/libteletone_generate.c' || echo '$(srcdir)/'`src/libteletone_generate.c; \ @am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libteletone_la_CFLAGS) $(CFLAGS) -MT libteletone_la-libteletone_generate.lo -MD -MP -MF "$(DEPDIR)/libteletone_la-libteletone_generate.Tpo" -c -o libteletone_la-libteletone_generate.lo `test -f 'src/libteletone_generate.c' || echo '$(srcdir)/'`src/libteletone_generate.c; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libteletone_la-libteletone_generate.Tpo" "$(DEPDIR)/libteletone_la-libteletone_generate.Plo"; else rm -f "$(DEPDIR)/libteletone_la-libteletone_generate.Tpo"; exit 1; fi @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libteletone_la-libteletone_generate.Tpo" "$(DEPDIR)/libteletone_la-libteletone_generate.Plo"; else rm -f "$(DEPDIR)/libteletone_la-libteletone_generate.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/libteletone_generate.c' object='libteletone_la-libteletone_generate.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/libteletone_generate.c' object='libteletone_la-libteletone_generate.lo' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libteletone_la_CFLAGS) $(CFLAGS) -c -o libteletone_la-libteletone_generate.lo `test -f 'src/libteletone_generate.c' || echo '$(srcdir)/'`src/libteletone_generate.c @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libteletone_la_CFLAGS) $(CFLAGS) -c -o libteletone_la-libteletone_generate.lo `test -f 'src/libteletone_generate.c' || echo '$(srcdir)/'`src/libteletone_generate.c
libteletone_la-libteletone_detect.lo: src/libteletone_detect.c libteletone_la-libteletone_detect.lo: src/libteletone_detect.c
@am__fastdepCC_TRUE@ if $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libteletone_la_CFLAGS) $(CFLAGS) -MT libteletone_la-libteletone_detect.lo -MD -MP -MF "$(DEPDIR)/libteletone_la-libteletone_detect.Tpo" -c -o libteletone_la-libteletone_detect.lo `test -f 'src/libteletone_detect.c' || echo '$(srcdir)/'`src/libteletone_detect.c; \ @am__fastdepCC_TRUE@ if $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libteletone_la_CFLAGS) $(CFLAGS) -MT libteletone_la-libteletone_detect.lo -MD -MP -MF "$(DEPDIR)/libteletone_la-libteletone_detect.Tpo" -c -o libteletone_la-libteletone_detect.lo `test -f 'src/libteletone_detect.c' || echo '$(srcdir)/'`src/libteletone_detect.c; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libteletone_la-libteletone_detect.Tpo" "$(DEPDIR)/libteletone_la-libteletone_detect.Plo"; else rm -f "$(DEPDIR)/libteletone_la-libteletone_detect.Tpo"; exit 1; fi @am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libteletone_la-libteletone_detect.Tpo" "$(DEPDIR)/libteletone_la-libteletone_detect.Plo"; else rm -f "$(DEPDIR)/libteletone_la-libteletone_detect.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/libteletone_detect.c' object='libteletone_la-libteletone_detect.lo' libtool=yes @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='src/libteletone_detect.c' object='libteletone_la-libteletone_detect.lo' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libteletone_la_CFLAGS) $(CFLAGS) -c -o libteletone_la-libteletone_detect.lo `test -f 'src/libteletone_detect.c' || echo '$(srcdir)/'`src/libteletone_detect.c @am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libteletone_la_CFLAGS) $(CFLAGS) -c -o libteletone_la-libteletone_detect.lo `test -f 'src/libteletone_detect.c' || echo '$(srcdir)/'`src/libteletone_detect.c
mostlyclean-libtool: mostlyclean-libtool:
-rm -f *.lo -rm -f *.lo
...@@ -357,7 +366,13 @@ uninstall-library_includeHEADERS: ...@@ -357,7 +366,13 @@ uninstall-library_includeHEADERS:
# (which will cause the Makefiles to be regenerated when you run `make'); # (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line. # (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS): $(RECURSIVE_TARGETS):
@set fnord $$MAKEFLAGS; amf=$$2; \ @failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \ dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \ target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \ list='$(SUBDIRS)'; for subdir in $$list; do \
...@@ -369,7 +384,7 @@ $(RECURSIVE_TARGETS): ...@@ -369,7 +384,7 @@ $(RECURSIVE_TARGETS):
local_target="$$target"; \ local_target="$$target"; \
fi; \ fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ || eval $$failcom; \
done; \ done; \
if test "$$dot_seen" = "no"; then \ if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
...@@ -377,7 +392,13 @@ $(RECURSIVE_TARGETS): ...@@ -377,7 +392,13 @@ $(RECURSIVE_TARGETS):
mostlyclean-recursive clean-recursive distclean-recursive \ mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive: maintainer-clean-recursive:
@set fnord $$MAKEFLAGS; amf=$$2; \ @failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \ dot_seen=no; \
case "$@" in \ case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
...@@ -398,7 +419,7 @@ maintainer-clean-recursive: ...@@ -398,7 +419,7 @@ maintainer-clean-recursive:
local_target="$$target"; \ local_target="$$target"; \
fi; \ fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ || eval $$failcom; \
done && test -z "$$fail" done && test -z "$$fail"
tags-recursive: tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \ list='$(SUBDIRS)'; for subdir in $$list; do \
...@@ -473,7 +494,7 @@ distclean-tags: ...@@ -473,7 +494,7 @@ distclean-tags:
distdir: $(DISTFILES) distdir: $(DISTFILES)
$(am__remove_distdir) $(am__remove_distdir)
mkdir $(distdir) mkdir $(distdir)
$(mkdir_p) $(distdir)/src $(mkdir_p) $(distdir)/build $(distdir)/build/config $(distdir)/src
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \ list='$(DISTFILES)'; for file in $$list; do \
......
libs/libteletone/aclocal.m4
浏览文件 @ 82d79185
This source diff could not be displayed because it is too large. You can view the blob instead.
libs/libteletone/depcomp → libs/libteletone/build/depcomp 100644 → 100755
浏览文件 @ 82d79185
#! /bin/sh #! /bin/sh
# depcomp - compile a program generating dependencies as side-effects # depcomp - compile a program generating dependencies as side-effects
# Copyright 1999, 2000, 2003 Free Software Foundation, Inc.
scriptversion=2005-07-09.11
# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify # This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by # it under the terms of the GNU General Public License as published by
...@@ -15,8 +17,8 @@ ...@@ -15,8 +17,8 @@
# You should have received a copy of the GNU General Public License # You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software # along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02111-1307, USA. # 02110-1301, USA.
# As a special exception to the GNU General Public License, if you # As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a # distribute this file as part of a program that contains a
...@@ -25,22 +27,45 @@ ...@@ -25,22 +27,45 @@
# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>. # Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
case $1 in
'')
echo "$0: No command. Try \`$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
Run PROGRAMS ARGS to compile a file, generating dependencies
as side-effects.
Environment variables:
depmode Dependency tracking mode.
source Source file read by `PROGRAMS ARGS'.
object Object file output by `PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
tmpdepfile Temporary file to use when outputing dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to <bug-automake@gnu.org>.
EOF
exit $?
;;
-v | --v*)
echo "depcomp $scriptversion"
exit $?
;;
esac
if test -z "$depmode" || test -z "$source" || test -z "$object"; then if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2 echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1 exit 1
fi fi
# `libtool' can also be set to `yes' or `no'.
if test -z "$depfile"; then
base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
dir=`echo "$object" | sed 's,/.*$,/,'`
if test "$dir" = "$object"; then
dir=
fi
# FIXME: should be _deps on DOS.
depfile="$dir.deps/$base"
fi
# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
depfile=${depfile-`echo "$object" |
sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile" rm -f "$tmpdepfile"
...@@ -262,27 +287,43 @@ tru64) ...@@ -262,27 +287,43 @@ tru64)
base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then if test "$libtool" = yes; then
tmpdepfile1="$dir.libs/$base.lo.d" # With Tru64 cc, shared objects can also be used to make a
tmpdepfile2="$dir.libs/$base.d" # static library. This mecanism is used in libtool 1.4 series to
# handle both shared and static libraries in a single compilation.
# With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
#
# With libtool 1.5 this exception was removed, and libtool now
# generates 2 separate objects for the 2 libraries. These two
# compilations output dependencies in in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
# automatically cleaned when .libs/ is deleted, while ignoring
# the former would cause a distcleancheck panic.
tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
tmpdepfile2=$dir$base.o.d # libtool 1.5
tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
"$@" -Wc,-MD "$@" -Wc,-MD
else else
tmpdepfile1="$dir$base.o.d" tmpdepfile1=$dir$base.o.d
tmpdepfile2="$dir$base.d" tmpdepfile2=$dir$base.d
tmpdepfile3=$dir$base.d
tmpdepfile4=$dir$base.d
"$@" -MD "$@" -MD
fi fi
stat=$? stat=$?
if test $stat -eq 0; then : if test $stat -eq 0; then :
else else
rm -f "$tmpdepfile1" "$tmpdepfile2" rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
exit $stat exit $stat
fi fi
if test -f "$tmpdepfile1"; then for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
tmpdepfile="$tmpdepfile1" do
else test -f "$tmpdepfile" && break
tmpdepfile="$tmpdepfile2" done
fi
if test -f "$tmpdepfile"; then if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
# That's a tab and a space in the []. # That's a tab and a space in the [].
...@@ -426,7 +467,8 @@ cpp) ...@@ -426,7 +467,8 @@ cpp)
done done
"$@" -E | "$@" -E |
sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile" sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile" rm -f "$depfile"
echo "$object : \\" > "$depfile" echo "$object : \\" > "$depfile"
...@@ -477,3 +519,12 @@ none) ...@@ -477,3 +519,12 @@ none)
esac esac
exit 0 exit 0
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:
libs/libteletone/build/install-sh 0 → 100755
浏览文件 @ 82d79185
#!/bin/sh
# install - install a program, script, or datafile
scriptversion=2005-05-14.22
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
chmodcmd="$chmodprog 0755"
chowncmd=
chgrpcmd=
stripcmd=
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=
dst=
dir_arg=
dstarg=
no_target_directory=
usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
-c (ignored)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
--help display this help and exit.
--version display version info and exit.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
"
while test -n "$1"; do
case $1 in
-c) shift
continue;;
-d) dir_arg=true
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
--help) echo "$usage"; exit $?;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-s) stripcmd=$stripprog
shift
continue;;
-t) dstarg=$2
shift
shift
continue;;
-T) no_target_directory=true
shift
continue;;
--version) echo "$0 $scriptversion"; exit $?;;
*) # When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
test -n "$dir_arg$dstarg" && break
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dstarg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dstarg"
shift # fnord
fi
shift # arg
dstarg=$arg
done
break;;
esac
done
if test -z "$1"; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call `install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
for src
do
# Protect names starting with `-'.
case $src in
-*) src=./$src ;;
esac
if test -n "$dir_arg"; then
dst=$src
src=
if test -d "$dst"; then
mkdircmd=:
chmodcmd=
else
mkdircmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dstarg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dstarg
# Protect names starting with `-'.
case $dst in
-*) dst=./$dst ;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
echo "$0: $dstarg: Is a directory" >&2
exit 1
fi
dst=$dst/`basename "$src"`
fi
fi
# This sed command emulates the dirname command.
dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# Skip lots of stat calls in the usual case.
if test ! -d "$dstdir"; then
defaultIFS='
'
IFS="${IFS-$defaultIFS}"
oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
shift
IFS=$oIFS
pathcomp=
while test $# -ne 0 ; do
pathcomp=$pathcomp$1
shift
if test ! -d "$pathcomp"; then
$mkdirprog "$pathcomp"
# mkdir can fail with a `File exist' error in case several
# install-sh are creating the directory concurrently. This
# is OK.
test -d "$pathcomp" || exit
fi
pathcomp=$pathcomp/
done
fi
if test -n "$dir_arg"; then
$doit $mkdircmd "$dst" \
&& { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
&& { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
else
dstfile=`basename "$dst"`
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
trap '(exit $?); exit' 1 2 13 15
# Copy the file name to the temp name.
$doit $cpprog "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
&& { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
# Now rename the file to the real destination.
{ $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
|| {
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
if test -f "$dstdir/$dstfile"; then
$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
|| $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
|| {
echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
(exit 1); exit 1
}
else
:
fi
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
}
}
fi || { (exit 1); exit 1; }
done
# The final little trick to "correctly" pass the exit status to the exit trap.
{
(exit 0); exit 0
}
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:
libs/libteletone/missing → libs/libteletone/build/missing 100644 → 100755
浏览文件 @ 82d79185
#! /bin/sh #! /bin/sh
# Common stub for a few missing GNU programs while installing. # Common stub for a few missing GNU programs while installing.
# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
scriptversion=2005-06-08.21
# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify # This program is free software; you can redistribute it and/or modify
...@@ -15,8 +19,8 @@ ...@@ -15,8 +19,8 @@
# You should have received a copy of the GNU General Public License # You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software # along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02111-1307, USA. # 02110-1301, USA.
# As a special exception to the GNU General Public License, if you # As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a # distribute this file as part of a program that contains a
...@@ -38,18 +42,24 @@ else ...@@ -38,18 +42,24 @@ else
configure_ac=configure.in configure_ac=configure.in
fi fi
msg="missing on your system"
case "$1" in case "$1" in
--run) --run)
# Try to run requested program, and just exit if it succeeds. # Try to run requested program, and just exit if it succeeds.
run= run=
shift shift
"$@" && exit 0 "$@" && exit 0
# Exit code 63 means version mismatch. This often happens
# when the user try to use an ancient version of a tool on
# a file that requires a minimum version. In this case we
# we should proceed has if the program had been absent, or
# if --run hadn't been passed.
if test $? = 63; then
run=:
msg="probably too old"
fi
;; ;;
esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case "$1" in
-h|--h|--he|--hel|--help) -h|--h|--he|--hel|--help)
echo "\ echo "\
...@@ -74,11 +84,15 @@ Supported PROGRAM values: ...@@ -74,11 +84,15 @@ Supported PROGRAM values:
lex create \`lex.yy.c', if possible, from existing .c lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]" yacc create \`y.tab.[ch]', if possible, from existing .[ch]
Send bug reports to <bug-automake@gnu.org>."
exit $?
;; ;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version) -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing 0.4 - GNU automake" echo "missing $scriptversion (GNU Automake)"
exit $?
;; ;;
-*) -*)
...@@ -87,14 +101,44 @@ Supported PROGRAM values: ...@@ -87,14 +101,44 @@ Supported PROGRAM values:
exit 1 exit 1
;; ;;
aclocal*) esac
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program).
case "$1" in
lex|yacc)
# Not GNU programs, they don't have --version.
;;
tar)
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
exit 1
fi
;;
*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed. # We have it, but it failed.
exit 1 exit 1
elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
# Could not run --version or --help. This is probably someone
# running `$TOOL --version' or `$TOOL --help' to check whether
# $TOOL exists and not knowing $TOOL uses missing.
exit 1
fi fi
;;
esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case "$1" in
aclocal*)
echo 1>&2 "\ echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if WARNING: \`$1' is $msg. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site." any GNU archive site."
...@@ -102,13 +146,8 @@ WARNING: \`$1' is missing on your system. You should only need it if ...@@ -102,13 +146,8 @@ WARNING: \`$1' is missing on your system. You should only need it if
;; ;;
autoconf) autoconf)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\ echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site." archive site."
...@@ -116,13 +155,8 @@ WARNING: \`$1' is missing on your system. You should only need it if ...@@ -116,13 +155,8 @@ WARNING: \`$1' is missing on your system. You should only need it if
;; ;;
autoheader) autoheader)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\ echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site." from any GNU archive site."
...@@ -140,13 +174,8 @@ WARNING: \`$1' is missing on your system. You should only need it if ...@@ -140,13 +174,8 @@ WARNING: \`$1' is missing on your system. You should only need it if
;; ;;
automake*) automake*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\ echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if WARNING: \`$1' is $msg. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages. You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site." Grab them from any GNU archive site."
...@@ -156,14 +185,9 @@ WARNING: \`$1' is missing on your system. You should only need it if ...@@ -156,14 +185,9 @@ WARNING: \`$1' is missing on your system. You should only need it if
;; ;;
autom4te) autom4te)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\ echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your WARNING: \`$1' is needed, but is $msg.
system. You might have modified some files without having the You might have modified some files without having the
proper tools for further handling them. proper tools for further handling them.
You can get \`$1' as part of \`Autoconf' from any GNU You can get \`$1' as part of \`Autoconf' from any GNU
archive site." archive site."
...@@ -185,7 +209,7 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your ...@@ -185,7 +209,7 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your
bison|yacc) bison|yacc)
echo 1>&2 "\ echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if WARNING: \`$1' $msg. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site." \`Bison' from any GNU archive site."
...@@ -215,7 +239,7 @@ WARNING: \`$1' is missing on your system. You should only need it if ...@@ -215,7 +239,7 @@ WARNING: \`$1' is missing on your system. You should only need it if
lex|flex) lex|flex)
echo 1>&2 "\ echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if WARNING: \`$1' is $msg. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site." \`Flex' from any GNU archive site."
...@@ -237,13 +261,8 @@ WARNING: \`$1' is missing on your system. You should only need it if ...@@ -237,13 +261,8 @@ WARNING: \`$1' is missing on your system. You should only need it if
;; ;;
help2man) help2man)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
fi
echo 1>&2 "\ echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take \`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site." effect. You can get \`Help2man' from any GNU archive site."
...@@ -262,32 +281,30 @@ WARNING: \`$1' is missing on your system. You should only need it if ...@@ -262,32 +281,30 @@ WARNING: \`$1' is missing on your system. You should only need it if
;; ;;
makeinfo) makeinfo)
if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
# We have makeinfo, but it failed.
exit 1
fi
echo 1>&2 "\ echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX, call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site." the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then if test -z "$file"; then
file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` # ... or it is the one specified with @setfilename ...
file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi fi
# If the file does not exist, the user really needs makeinfo;
# let's fail without touching anything.
test -f $file || exit 1
touch $file touch $file
;; ;;
tar) tar)
shift shift
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
fi
# We have already tried tar in the generic part. # We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error # Look for gnutar/gtar before invocation to avoid ugly error
...@@ -323,8 +340,8 @@ WARNING: I can't seem to be able to run \`tar' with the given arguments. ...@@ -323,8 +340,8 @@ WARNING: I can't seem to be able to run \`tar' with the given arguments.
*) *)
echo 1>&2 "\ echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your WARNING: \`$1' is needed, and is $msg.
system. You might have modified some files without having the You might have modified some files without having the
proper tools for further handling them. Check the \`README' file, proper tools for further handling them. Check the \`README' file,
it often tells you about the needed prerequisites for installing it often tells you about the needed prerequisites for installing
this package. You may also peek at any GNU archive site, in case this package. You may also peek at any GNU archive site, in case
...@@ -334,3 +351,10 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your ...@@ -334,3 +351,10 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your
esac esac
exit 0 exit 0
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:
libs/libteletone/configure
浏览文件 @ 82d79185
差异被折叠。
libs/libteletone/configure.in
浏览文件 @ 82d79185
# -*- Autoconf -*- # -*- Autoconf -*-
# Process this file with autoconf to produce a configure script. # Process this file with autoconf to produce a configure script.
AC_PREREQ(2.59) AC_PREREQ(2.59)
AC_INIT(FULL-PACKAGE-NAME, VERSION, BUG-REPORT-ADDRESS) AC_INIT(libteletone, 0.1, BUG-REPORT-ADDRESS)
AM_INIT_AUTOMAKE(libteletone,0.1) AC_CONFIG_AUX_DIR(build)
AC_CONFIG_AUX_DIR(build/config) AM_INIT_AUTOMAKE(libteletone,0.1)
AC_CONFIG_SRCDIR([src]) AC_CONFIG_SRCDIR([src])
#AC_CONFIG_HEADER([]) #AC_CONFIG_HEADER([])
# Checks for programs. # Checks for programs.
AC_PROG_CC AC_PROG_CC
AC_PROG_MAKE_SET AC_PROG_MAKE_SET
AC_PROG_LIBTOOL AC_PROG_LIBTOOL
AC_PROG_INSTALL AC_PROG_INSTALL
dnl invoked here cause the macros require it as well and I kicked it out of them :) # Optimize
AC_CANONICAL_HOST AC_ARG_ENABLE(optimization,
# Optimize [AC_HELP_STRING([--enable-optimization],[Set if you want us to add max optimising compiler flags])],[enable_optimizer="$enableval"],[enable_optimizer="no"])
AC_ARG_ENABLE(optimization,
[AC_HELP_STRING([--enable-optimization],[Set if you want us to add max optimising compiler flags])],[enable_optimizer="$enableval"],[enable_optimizer="no"]) if test "${enable_optimizer}" = "yes" ; then
AC_DEFINE([OPTIMZER],[],[Enable Optimization.])
if test "${enable_optimizer}" = "yes" ; then AX_CC_MAXOPT
AC_DEFINE([OPTIMZER],[],[Enable Optimization.]) fi
AX_CC_MAXOPT
fi # Enable debugging
AC_ARG_ENABLE(debug,
# Enable debugging [AC_HELP_STRING([--enable-debug],[build with debug information])],[enable_debug="$enable_debug"],[enable_debug="yes"])
AC_ARG_ENABLE(debug,
[AC_HELP_STRING([--enable-debug],[build with debug information])],[enable_debug="$enable_debug"],[enable_debug="yes"]) if test "${enable_debug}" = "yes"; then
AC_DEFINE([DEBUG],[],[Enable extra debugging.])
if test "${enable_debug}" = "yes"; then AX_CFLAGS_WARN_ALL_ANSI
AC_DEFINE([DEBUG],[],[Enable extra debugging.]) fi
AX_CFLAGS_WARN_ALL_ANSI
fi AM_CONDITIONAL([WANT_DEBUG],[test "${enable_debug}" = "yes"])
AM_CONDITIONAL([WANT_DEBUG],[test "${enable_debug}" = "yes"]) dnl check for the compiler used
AX_COMPILER_VENDOR
dnl check for the compiler used
AX_COMPILER_VENDOR case "$host" in
*-solaris2*)
case "$host" in if test "x${ax_cv_c_compiler_vendor}" = "xsun" ; then
*-solaris2*) new_AM_CFLAGS="-KPIC -DPIC"
if test "x${ax_cv_c_compiler_vendor}" = "xsun" ; then new_AM_LDFLAGS="-L${prefix}/lib -R${prefix}/lib"
new_AM_CFLAGS="${CFLAGS} -KPIC -DPIC" fi
new_AM_LDFLAGS="-L${prefix}/lib -R${prefix}/lib" ;;
fi *-darwin*)
;; if test "x${ax_cv_c_compiler_vendor}" = "xgnu" ; then
*-darwin*) new_AM_CFLAGS="-DMACOSX"
if test "x${ax_cv_c_compiler_vendor}" = "xgnu" ; then fi
new_AM_CFLAGS="${CFLAGS} -DMACOSX" ;;
fi x86_64-unknown-linux-gnu)
;; new_AM_CFLAGS="-fPIC"
x86_64-unknown-linux-gnu) new_AM_LDFLAGS=""
new_AM_CFLAGS="${CFLAGS} -fPIC" ;;
new_AM_LDFLAGS="" i*6-unknown-linux-gnu)
;; new_AM_CFLAGS="-fpic"
i*6-unknown-linux-gnu) new_AM_LDFLAGS=""
new_AM_CFLAGS="${CFLAGS} -fpic" ;;
new_AM_LDFLAGS="" esac
;; AC_SUBST(new_AM_CFLAGS)
esac AC_SUBST(new_AM_LDFLAGS)
AC_SUBST(new_AM_CFLAGS)
AC_SUBST(new_AM_LDFLAGS) # Checks for header files.
AC_HEADER_DIRENT
# Checks for header files. AC_HEADER_STDC
AC_HEADER_DIRENT #AC_CHECK_HEADERS([arpa/inet.h fcntl.h netdb.h netinet/in.h stdlib.h string.h sys/ioctl.h sys/socket.h sys/time.h unistd.h])
AC_HEADER_STDC
#AC_CHECK_HEADERS([arpa/inet.h fcntl.h netdb.h netinet/in.h stdlib.h string.h sys/ioctl.h sys/socket.h sys/time.h unistd.h]) # Checks for typedefs, structures, and compiler characteristics.
AC_C_CONST
# Checks for typedefs, structures, and compiler characteristics. AC_C_INLINE
AC_C_CONST AC_TYPE_SIZE_T
AC_C_INLINE AC_HEADER_TIME
AC_TYPE_SIZE_T AC_STRUCT_TM
AC_HEADER_TIME
AC_STRUCT_TM # Checks for library functions.
AC_PROG_GCC_TRADITIONAL
# Checks for library functions. AC_FUNC_MALLOC
AC_PROG_GCC_TRADITIONAL AC_TYPE_SIGNAL
AC_FUNC_MALLOC AC_FUNC_STRFTIME
AC_TYPE_SIGNAL #AC_CHECK_FUNCS([gethostname gettimeofday localtime_r memmove memset socket strcasecmp strchr strdup strncasecmp strstr])
AC_FUNC_STRFTIME
#AC_CHECK_FUNCS([gethostname gettimeofday localtime_r memmove memset socket strcasecmp strchr strdup strncasecmp strstr]) AC_CONFIG_FILES([Makefile])
AC_CONFIG_FILES([Makefile]) AC_OUTPUT
AC_OUTPUT
libs/libteletone/install-sh deleted 100644 → 0
浏览文件 @ 561009ae
#!/bin/sh
#
# install - install a program, script, or datafile
#
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd=$cpprog
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd=$stripprog
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "$0: no input file specified" >&2
exit 1
else
:
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d "$dst" ]; then
instcmd=:
chmodcmd=""
else
instcmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f "$src" ] || [ -d "$src" ]
then
:
else
echo "$0: $src does not exist" >&2
exit 1
fi
if [ x"$dst" = x ]
then
echo "$0: no destination specified" >&2
exit 1
else
:
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d "$dst" ]
then
dst=$dst/`basename "$src"`
else
:
fi
fi
## this sed command emulates the dirname command
dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-$defaultIFS}"
oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS=$oIFS
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp=$pathcomp$1
shift
if [ ! -d "$pathcomp" ] ;
then
$mkdirprog "$pathcomp"
else
:
fi
pathcomp=$pathcomp/
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd "$dst" &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename "$dst"`
else
dstfile=`basename "$dst" $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename "$dst"`
else
:
fi
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up temp files at exit.
trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
trap '(exit $?); exit' 1 2 13 15
# Move or copy the file name to the temp name
$doit $instcmd "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
# Now remove or move aside any old file at destination location. We try this
# two ways since rm can't unlink itself on some systems and the destination
# file might be busy for other reasons. In this case, the final cleanup
# might fail but the new file should still install successfully.
{
if [ -f "$dstdir/$dstfile" ]
then
$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
{
echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
(exit 1); exit
}
else
:
fi
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
fi &&
# The final little trick to "correctly" pass the exit status to the exit trap.
{
(exit 0); exit
}
Markdown 格式
0% 或
您添加了 0 人 到此讨论。请谨慎行事。
请先完成此评论的编辑！
请 注册 或者 后发表评论