freetdm: Added Analog E&M outbound call answer supervision

         You must add answer-supervision=yes in your freetdm.conf.xml
         Also added dial-timeout parameter which was previously hard-coded

libs/freetdm/mod_freetdm/mod_freetdm.c

@@ -3775,11 +3775,14 @@ static switch_status_t load_config(void)
 			const char *dialplan = "XML";
 			const char *tonegroup = NULL;
 			char *digit_timeout = NULL;
+			char *dial_timeout = NULL;
 			char *max_digits = NULL;
 			char *dial_regex = NULL;
 			char *hold_music = NULL;
 			char *fail_dial_regex = NULL;
-			uint32_t span_id = 0, to = 0, max = 0;
+			char str_false[] = "false";
+			char *answer_supervision = str_false;
+			uint32_t span_id = 0, to = 0, max = 0, dial_timeout_int = 0;
 			ftdm_span_t *span = NULL;
 			analog_option_t analog_options = ANALOG_OPTION_NONE;
 
@@ -3791,6 +3794,8 @@ static switch_status_t load_config(void)
 					tonegroup = val;
 				} else if (!strcasecmp(var, "digit_timeout") || !strcasecmp(var, "digit-timeout")) {
 					digit_timeout = val;
+				} else if (!strcasecmp(var, "dial-timeout")) {
+					dial_timeout = val;
 				} else if (!strcasecmp(var, "context")) {
 					context = val;
 				} else if (!strcasecmp(var, "dialplan")) {
@@ -3803,6 +3808,8 @@ static switch_status_t load_config(void)
 					hold_music = val;
 				} else if (!strcasecmp(var, "max_digits") || !strcasecmp(var, "max-digits")) {
 					max_digits = val;
+				} else if (!strcasecmp(var, "answer-supervision")) {
+					answer_supervision = val;
 				} else if (!strcasecmp(var, "enable-analog-option")) {
 					analog_options = enable_analog_option(val, analog_options);
 				}
@@ -3821,6 +3828,10 @@ static switch_status_t load_config(void)
 				to = atoi(digit_timeout);
 			}
 
+			if (dial_timeout) {
+				dial_timeout_int = atoi(dial_timeout);
+			}
+
 			if (max_digits) {
 				max = atoi(max_digits);
 			}
@@ -3851,7 +3862,9 @@ static switch_status_t load_config(void)
 
 			if (ftdm_configure_span(span, "analog_em", on_analog_signal,
 								   "tonemap", tonegroup,
+								   "answer_supervision", answer_supervision,
 								   "digit_timeout", &to,
+								   "dial_timeout", &dial_timeout_int,
 								   "max_dialstr", &max,
 								   FTDM_TAG_END) != FTDM_SUCCESS) {
 				LOAD_ERROR("Error starting FreeTDM span %d\n", span_id);

libs/freetdm/src/ftmod/ftmod_analog_em/ftdm_analog_em.h

@@ -51,6 +51,8 @@ struct ftdm_analog_data {
 	uint32_t flags;
 	uint32_t max_dialstr;
 	uint32_t digit_timeout;
+	uint32_t dial_timeout;
+	ftdm_bool_t answer_supervision;
 };
 
 static void *ftdm_analog_em_run(ftdm_thread_t *me, void *obj);

libs/freetdm/src/ftmod/ftmod_analog_em/ftmod_analog_em.c

@@ -120,8 +120,10 @@ static FIO_SIG_CONFIGURE_FUNCTION(ftdm_analog_em_configure_span)
 {
 	ftdm_analog_em_data_t *analog_data;
 	const char *tonemap = "us";
-	uint32_t digit_timeout = 10;
+	uint32_t digit_timeout = 2000;
 	uint32_t max_dialstr = 11;
+	uint32_t dial_timeout = 0;
+	ftdm_bool_t answer_supervision = FTDM_FALSE;
 	const char *var, *val;
 	int *intval;
 
@@ -137,11 +139,22 @@ static FIO_SIG_CONFIGURE_FUNCTION(ftdm_analog_em_configure_span)
 	memset(analog_data, 0, sizeof(*analog_data));
 
 	while((var = va_arg(ap, char *))) {
+		ftdm_log(FTDM_LOG_DEBUG, "Parsing analog em parameter '%s'\n", var);
 		if (!strcasecmp(var, "tonemap")) {
 			if (!(val = va_arg(ap, char *))) {
 				break;
 			}
 			tonemap = val;
+		} else if (!strcasecmp(var, "answer_supervision")) {
+			if (!(val = va_arg(ap, char *))) {
+				break;
+			}
+			answer_supervision = ftdm_true(val);
+		} else if (!strcasecmp(var, "dial_timeout")) {
+			if (!(intval = va_arg(ap, int *))) {
+				break;
+			}
+			dial_timeout = *intval;
 		} else if (!strcasecmp(var, "digit_timeout")) {
 			if (!(intval = va_arg(ap, int *))) {
 				break;
@@ -153,7 +166,7 @@ static FIO_SIG_CONFIGURE_FUNCTION(ftdm_analog_em_configure_span)
 			}
 			max_dialstr = *intval;
 		} else {
-			snprintf(span->last_error, sizeof(span->last_error), "Unknown parameter [%s]", var);
+			ftdm_log(FTDM_LOG_ERROR, "Invalid parameter for analog em span: '%s'\n", var);
 			return FTDM_FAIL;
 		}
 	}
@@ -171,6 +184,8 @@ static FIO_SIG_CONFIGURE_FUNCTION(ftdm_analog_em_configure_span)
 	span->start = ftdm_analog_em_start;
 	analog_data->digit_timeout = digit_timeout;
 	analog_data->max_dialstr = max_dialstr;
+	analog_data->dial_timeout = dial_timeout;
+	analog_data->answer_supervision = answer_supervision;
 	span->signal_cb = sig_cb;
 	span->signal_type = FTDM_SIGTYPE_ANALOG;
 	span->signal_data = analog_data;
@@ -221,6 +236,9 @@ static void *ftdm_analog_em_channel_run(ftdm_thread_t *me, void *obj)
 	ftdm_channel_t *closed_chan;
 	uint32_t state_counter = 0, elapsed = 0, collecting = 0, interval = 0, last_digit = 0, indicate = 0, dial_timeout = 30000;
 	ftdm_sigmsg_t sig;
+	int cas_bits = 0;
+	uint32_t cas_answer = 0;
+	int cas_answer_ms = 500;
 	
 	ftdm_log(FTDM_LOG_DEBUG, "ANALOG EM CHANNEL thread starting.\n");
 
@@ -259,6 +277,7 @@ static void *ftdm_analog_em_channel_run(ftdm_thread_t *me, void *obj)
 	sig.channel = ftdmchan;
 	
 	assert(interval != 0);
+	ftdm_log_chan(ftdmchan, FTDM_LOG_DEBUG, "IO Interval: %u\n", interval);
 
 	while (ftdm_running() && ftdm_test_flag(ftdmchan, FTDM_CHANNEL_INTHREAD)) {
 		ftdm_wait_flag_t flags = FTDM_READ;
@@ -266,7 +285,7 @@ static void *ftdm_analog_em_channel_run(ftdm_thread_t *me, void *obj)
 		
 		elapsed += interval;
 		state_counter += interval;
-		
+
 		if (!ftdm_test_flag(ftdmchan, FTDM_CHANNEL_STATE_CHANGE)) {
 			switch(ftdmchan->state) {
 			case FTDM_CHANNEL_STATE_DIALING:
@@ -288,6 +307,11 @@ static void *ftdm_analog_em_channel_run(ftdm_thread_t *me, void *obj)
 								ftdmchan->needed_tones[FTDM_TONEMAP_FAIL2] = 1;
 								ftdmchan->needed_tones[FTDM_TONEMAP_FAIL3] = 1;
 								dial_timeout = ((ftdmchan->dtmf_on + ftdmchan->dtmf_off) * strlen(ftdmchan->caller_data.dnis.digits)) + 2000;
+								if (analog_data->dial_timeout) {
+									dial_timeout += analog_data->dial_timeout;
+								}
+								ftdm_log_chan(ftdmchan, FTDM_LOG_DEBUG, "Outbound dialing timeout: %dms\n", dial_timeout);
+								ftdm_log_chan(ftdmchan, FTDM_LOG_DEBUG, "Outbound CAS answer timeout: %dms\n", cas_answer_ms);
 							}
 						}
 						break;
@@ -295,10 +319,25 @@ static void *ftdm_analog_em_channel_run(ftdm_thread_t *me, void *obj)
 					if (state_counter > dial_timeout) {
 						if (!ftdm_test_flag(ftdmchan, FTDM_CHANNEL_WINK)) {
 							ftdm_set_state_locked(ftdmchan, FTDM_CHANNEL_STATE_BUSY);
-						} else {
+						} else if (!analog_data->answer_supervision) {
+							ftdm_set_state_locked(ftdmchan, FTDM_CHANNEL_STATE_UP);
+						}
+					}
+					cas_bits = 0;
+					ftdm_channel_command(ftdmchan, FTDM_COMMAND_GET_CAS_BITS, &cas_bits);
+					if (!(state_counter % 1000)) {
+						ftdm_log_chan(ftdmchan, FTDM_LOG_DEBUG, "CAS bits: 0x%X\n", cas_bits);
+					}
+					if (cas_bits == 0xF) {
+						cas_answer += interval;
+						if (cas_answer >= cas_answer_ms) {
+							ftdm_log_chan_msg(ftdmchan, FTDM_LOG_DEBUG, "Answering on CAS answer signal persistence!\n");
 							ftdm_set_state_locked(ftdmchan, FTDM_CHANNEL_STATE_UP);
 						}
-					} 
+					} else if (cas_answer) {
+						ftdm_log_chan(ftdmchan, FTDM_LOG_DEBUG, "Resetting cas answer to 0: 0x%X!\n", cas_bits);
+						cas_answer = 0;
+					}
 				}
 				break;
 			case FTDM_CHANNEL_STATE_DIALTONE:
@@ -515,7 +554,11 @@ static void *ftdm_analog_em_channel_run(ftdm_thread_t *me, void *obj)
 				ftdm_log(FTDM_LOG_ERROR, "Failure indication detected!\n");
 				ftdm_set_state_locked(ftdmchan, FTDM_CHANNEL_STATE_BUSY);
 			} else if (ftdmchan->detected_tones[FTDM_TONEMAP_RING]) {
-				ftdm_set_state_locked(ftdmchan, FTDM_CHANNEL_STATE_UP);
+				if (!analog_data->answer_supervision) {
+					ftdm_set_state_locked(ftdmchan, FTDM_CHANNEL_STATE_UP);
+				} else {
+					ftdm_log_chan_msg(ftdmchan, FTDM_LOG_DEBUG, "Ringing, but not answering since answer supervision is enabled\n");
+				}
 			}
 			
 			ftdm_channel_clear_detected_tones(ftdmchan);
@@ -617,7 +660,9 @@ static __inline__ ftdm_status_t process_event(ftdm_span_t *span, ftdm_event_t *e
 	case FTDM_OOB_OFFHOOK:
 		{
 			if (ftdm_test_flag(event->channel, FTDM_CHANNEL_INTHREAD)) {
-				ftdm_set_state_locked(event->channel, FTDM_CHANNEL_STATE_UP);
+				if (event->channel->state < FTDM_CHANNEL_STATE_UP) {
+					ftdm_set_state_locked(event->channel, FTDM_CHANNEL_STATE_UP);
+				}
 			} else {
 				ftdm_set_state_locked(event->channel, FTDM_CHANNEL_STATE_DIALTONE);
 				ftdm_mutex_unlock(event->channel->mutex);

libs/freetdm/src/ftmod/ftmod_zt/ftmod_zt.c

@@ -1098,6 +1098,7 @@ static __inline__ int handle_dtmf_event(ftdm_channel_t *fchan, zt_event_t zt_eve
  */
 static __inline__ ftdm_status_t zt_channel_process_event(ftdm_channel_t *fchan, ftdm_oob_event_t *event_id, zt_event_t zt_event_id)
 {
+	ftdm_log_chan(fchan, FTDM_LOG_DEBUG, "Processing zap hardware event %d\n", zt_event_id);
 	switch(zt_event_id) {
 	case ZT_EVENT_RINGEROFF:
 		{
@@ -1132,16 +1133,30 @@ static __inline__ ftdm_status_t zt_channel_process_event(ftdm_channel_t *fchan,
 		break;
 	case ZT_EVENT_RINGOFFHOOK:
 		{
+			*event_id = FTDM_OOB_NOOP;
 			if (fchan->type == FTDM_CHAN_TYPE_FXS || (fchan->type == FTDM_CHAN_TYPE_EM && fchan->state != FTDM_CHANNEL_STATE_UP)) {
 				if (fchan->type != FTDM_CHAN_TYPE_EM) {
-					/* In E&M we're supposed to set this flag when the tx side goes offhook, not the rx */
+					/* In E&M we're supposed to set this flag only when the local side goes offhook, not the remote */
 					ftdm_set_flag_locked(fchan, FTDM_CHANNEL_OFFHOOK);
 				}
-				*event_id = FTDM_OOB_OFFHOOK;
+
+				/* For E&M let's count the ring count (it seems sometimes we receive RINGOFFHOOK once before the other end
+				 * answers, then another RINGOFFHOOK when the other end answers?? anyways, now we count rings before delivering the
+				 * offhook event ... the E&M signaling code in ftmod_analog_em also polls the RBS bits looking for answer, just to
+				 * be safe and not rely on this event, so even if this event does not arrive, when there is answer supervision
+				 * the analog signaling code should detect the cas persistance pattern and answer */
+				if (fchan->type == FTDM_CHAN_TYPE_EM && ftdm_test_flag(fchan, FTDM_CHANNEL_OUTBOUND)) {
+					fchan->ring_count++;
+					/* perhaps some day we'll make this configurable, but since I am not even sure what the hell is going on
+					 * no point in making a configuration option for something that may not be technically correct */
+					if (fchan->ring_count == 2) {
+						*event_id = FTDM_OOB_OFFHOOK;
+					}
+				} else {
+					*event_id = FTDM_OOB_OFFHOOK;
+				}
 			} else if (fchan->type == FTDM_CHAN_TYPE_FXO) {
 				*event_id = FTDM_OOB_RING_START;
-			} else {
-				*event_id = FTDM_OOB_NOOP;
 			}
 		}
 		break;

libs/freetdm/src/include/private/ftdm_core.h

@@ -92,7 +92,7 @@
 			   !strcasecmp(expr, "true") ||		\
 			   !strcasecmp(expr, "enabled") ||	\
 			   !strcasecmp(expr, "active") ||	\
-			   atoi(expr))) ? 1 : 0
+			   atoi(expr))) ? FTDM_TRUE : FTDM_FALSE
 
 #ifdef WIN32_LEAN_AND_MEAN
 #include <winsock2.h>