merge jrtplib jthread and jrtp4c into 1 library (thanks mikej)

git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@496 d0543943-73ff-0310-b7d9-9358b9ac24b2

libs/jrtp4c/INSTALL

-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
-
-   This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
-   These are generic installation instructions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
-for details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-   Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-will cause the specified gcc to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-`configure' Invocation
-======================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
-     Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
-

libs/jrtp4c/Makefile.am

-EXTRA_DIST =
-SUBDIRS = 
-AUTOMAKE_OPTS= gnu
-MAKE=gmake
-NAME=jrtp4c
-
-AM_CC=g++
-AM_CFLAGS	= -Wall -ansi -pedantic -g -O2 -Isrc -I${prefix}/include/jthread -I${prefix}/include/jrtplib3
-AM_CPPFLAGS = $(AM_CFLAGS) 
-
-lib_LTLIBRARIES		= libjrtp4c.la
-libjrtp4c_la_SOURCES	= src/jrtp4c.cpp
-libjrtp4c_la_CFLAGS	= $(AM_CFLAGS)
-libjrtp4c_la_LDFLAGS	= -L${prefix}/lib -ljrtp -ljthread -lpthread
-
-library_includedir	= $(prefix)/include
-library_include_HEADERS = src/jrtp4c.h
-
-
-
-
-
-

libs/jrtp4c/configure.in

-#                                               -*- Autoconf -*-
-# Process this file with autoconf to produce a configure script.
-
-AC_PREREQ(2.59)
-AC_INIT(FULL-PACKAGE-NAME, VERSION, BUG-REPORT-ADDRESS)
-AM_INIT_AUTOMAKE(libjrtp4c,0.1)
-AC_CONFIG_SRCDIR([src/jrtp4c.cpp])
-#AC_CONFIG_HEADER([])
-
-# Checks for programs.
-AC_PROG_CC
-AC_PROG_MAKE_SET
-AC_PROG_LIBTOOL
-AC_PROG_INSTALL
-
-# Checks for header files.
-AC_HEADER_DIRENT
-AC_HEADER_STDC
-#AC_CHECK_HEADERS([arpa/inet.h fcntl.h netdb.h netinet/in.h stdlib.h string.h sys/ioctl.h sys/socket.h sys/time.h unistd.h])
-
-# Checks for typedefs, structures, and compiler characteristics.
-AC_C_CONST
-AC_C_INLINE
-AC_TYPE_SIZE_T
-AC_HEADER_TIME
-AC_STRUCT_TM
-
-# Checks for library functions.
-AC_PROG_GCC_TRADITIONAL
-AC_FUNC_MALLOC
-AC_TYPE_SIGNAL
-AC_FUNC_STRFTIME
-#AC_CHECK_FUNCS([gethostname gettimeofday localtime_r memmove memset socket strcasecmp strchr strdup strncasecmp strstr])
-
-AC_CONFIG_FILES([Makefile])
-
-AC_OUTPUT

libs/jrtp4c/mkinstalldirs

-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-
-errstatus=0
-dirmode=""
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
-
-# process command line arguments
-while test $# -gt 0 ; do
-  case $1 in
-    -h | --help | --h*)         # -h for help
-      echo "$usage" 1>&2
-      exit 0
-      ;;
-    -m)                         # -m PERM arg
-      shift
-      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
-      dirmode=$1
-      shift
-      ;;
-    --)                         # stop option processing
-      shift
-      break
-      ;;
-    -*)                         # unknown option
-      echo "$usage" 1>&2
-      exit 1
-      ;;
-    *)                          # first non-opt arg
-      break
-      ;;
-  esac
-done
-
-for file
-do
-  if test -d "$file"; then
-    shift
-  else
-    break
-  fi
-done
-
-case $# in
-  0) exit 0 ;;
-esac
-
-case $dirmode in
-  '')
-    if mkdir -p -- . 2>/dev/null; then
-      echo "mkdir -p -- $*"
-      exec mkdir -p -- "$@"
-    fi
-    ;;
-  *)
-    if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
-      echo "mkdir -m $dirmode -p -- $*"
-      exec mkdir -m "$dirmode" -p -- "$@"
-    fi
-    ;;
-esac
-
-for file
-do
-  set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-  shift
-
-  pathcomp=
-  for d
-  do
-    pathcomp="$pathcomp$d"
-    case $pathcomp in
-      -*) pathcomp=./$pathcomp ;;
-    esac
-
-    if test ! -d "$pathcomp"; then
-      echo "mkdir $pathcomp"
-
-      mkdir "$pathcomp" || lasterr=$?
-
-      if test ! -d "$pathcomp"; then
-  	errstatus=$lasterr
-      else
-  	if test ! -z "$dirmode"; then
-	  echo "chmod $dirmode $pathcomp"
-    	  lasterr=""
-  	  chmod "$dirmode" "$pathcomp" || lasterr=$?
-
-  	  if test ! -z "$lasterr"; then
-  	    errstatus=$lasterr
-  	  fi
-  	fi
-      fi
-    fi
-
-    pathcomp="$pathcomp/"
-  done
-done
-
-exit $errstatus
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# End:
-# mkinstalldirs ends here

libs/jrtp4c/src/jrtp4c.h

-/*
- * CCRTP4C (A wrapper for ccRTP so you can use it in C programs)
- * Copyright Anthony Minessale II <anthmct@yahoo.com>
- *
- */
-#ifndef CCRTP4C_H
-#define CCRTP4C_H
-
-#ifdef WIN32
-#include <winsock2.h>
-#pragma warning(disable: 4267)
-#else
-#include <netinet/in.h>
-#include <arpa/inet.h>
-#endif // WIN32
-
-#ifdef __cplusplus
-#include <rtpsession.h>
-#include <rtppacket.h>
-#include <rtpudpv4transmitter.h>
-#include <rtpipv4address.h>
-#include <rtpsessionparams.h>
-#include <rtperrors.h>
-
-extern "C" {
-#endif
-
-	typedef enum {
-		SR,
-		RR,
-		SDES,
-		BYE,
-		APP,
-		UNK
-	} jrtp4c_packet_t;
-
-#ifndef uint32_t
-#ifdef WIN32
-	typedef unsigned int uint32_t;
-#else
-#include <sys/types.h>
-#endif
-#endif
-
-	struct jrtp4c;
-	struct jrtp4c *jrtp4c_new(char *rx_ip, int rx_port, char *tx_ip, int tx_port, int payload, int sps, const char **err);
-	void jrtp4c_destroy(struct jrtp4c **jrtp4c);
-	int jrtp4c_read(struct jrtp4c *jrtp4c, void *data, int datalen);
-	int jrtp4c_write(struct jrtp4c *jrtp4c, void *data, int datalen, uint32_t ts);
-	uint32_t jrtp4c_start(struct jrtp4c *jrtp4c);
-	uint32_t jrtp4c_get_ssrc(struct jrtp4c *jrtp4c);
-	void jrtp4c_killread(struct jrtp4c *jrtp4c);
-#ifdef __cplusplus
-}
-#endif
-
-#endif

libs/jrtp4c/w32/jrtp4c.sln

-
-Microsoft Visual Studio Solution File, Format Version 9.00
-# Visual C++ Express 2005
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jrtp4c", "jrtp4c.vcproj", "{E85B3E1F-B671-4E84-9F09-90F61A27D783}"
-	ProjectSection(ProjectDependencies) = postProject
-		{4009F58A-E333-424B-A868-7E82804DD055} = {4009F58A-E333-424B-A868-7E82804DD055}
-	EndProjectSection
-EndProject
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jthread", "..\..\jthread-1.1.2\jthread.vcproj", "{96A714AE-BE53-4EFF-8569-C3809AD4F3B6}"
-EndProject
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jrtplib", "..\..\jrtplib\jrtplib.vcproj", "{4009F58A-E333-424B-A868-7E82804DD055}"
-	ProjectSection(ProjectDependencies) = postProject
-		{96A714AE-BE53-4EFF-8569-C3809AD4F3B6} = {96A714AE-BE53-4EFF-8569-C3809AD4F3B6}
-	EndProjectSection
-EndProject
-Global
-	GlobalSection(SolutionConfigurationPlatforms) = preSolution
-		Debug|Win32 = Debug|Win32
-		Release|Win32 = Release|Win32
-	EndGlobalSection
-	GlobalSection(ProjectConfigurationPlatforms) = postSolution
-		{E85B3E1F-B671-4E84-9F09-90F61A27D783}.Debug|Win32.ActiveCfg = Debug|Win32
-		{E85B3E1F-B671-4E84-9F09-90F61A27D783}.Debug|Win32.Build.0 = Debug|Win32
-		{E85B3E1F-B671-4E84-9F09-90F61A27D783}.Release|Win32.ActiveCfg = Release|Win32
-		{E85B3E1F-B671-4E84-9F09-90F61A27D783}.Release|Win32.Build.0 = Release|Win32
-		{96A714AE-BE53-4EFF-8569-C3809AD4F3B6}.Debug|Win32.ActiveCfg = Debug|Win32
-		{96A714AE-BE53-4EFF-8569-C3809AD4F3B6}.Debug|Win32.Build.0 = Debug|Win32
-		{96A714AE-BE53-4EFF-8569-C3809AD4F3B6}.Release|Win32.ActiveCfg = Release|Win32
-		{96A714AE-BE53-4EFF-8569-C3809AD4F3B6}.Release|Win32.Build.0 = Release|Win32
-		{4009F58A-E333-424B-A868-7E82804DD055}.Debug|Win32.ActiveCfg = Debug|Win32
-		{4009F58A-E333-424B-A868-7E82804DD055}.Debug|Win32.Build.0 = Debug|Win32
-		{4009F58A-E333-424B-A868-7E82804DD055}.Release|Win32.ActiveCfg = Release|Win32
-		{4009F58A-E333-424B-A868-7E82804DD055}.Release|Win32.Build.0 = Release|Win32
-	EndGlobalSection
-	GlobalSection(SolutionProperties) = preSolution
-		HideSolutionNode = FALSE
-	EndGlobalSection
-EndGlobal